After cleaning and/or stripping, allow the wood to dry for 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish. Apply a second coat of Textrol in the same way as the first. Again allow to soak in for 15-30 minutes.

Textrol Laboratories Inc.(formerly Textrol Inc.), is a world leader in Precision Yarn Tension Control Systems. Textrol Laboratories offers the most advanced Hysteresis Brakes and Permanent Magnet Brakes for tension control systems in the world. Our precision calibration methods give us the ability to build a world class Tension System for most of the Yarns, Strands, Ribbons, Etc. used in the industrial world. In this post we will deal with the first, and in the following two posts we will look at the others – got it? Apply a single liberal application of Textrol HES working in the direction of the grain. After 15-30 minutes brush out any excess to improve penetration and give a uniform finish. Clear is the perfect solution where a totally natural look is desired. Redwood Tone is the ideal colour for enhancing the natural redness and characteristics of woods such as Ipe, Balau and Mahogany while Cedar Tone works wonders on Iroko and other similar light-coloured timbers.Before starting, test the colour choice on a small area. Allow to dry to determine final colour (remember that this colour will lighten over a couple of months to the final colour). NOTE: Any rags, steel wool etc. soaked in Textrol may spontaneously catch fire if improperly discarded. These must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste. Things to Remember

If none of those took your fancy, there are an endless number of different types of decorative fence panels, from curvy tops to castle styles you’re bound to find something right for you – do be aware though that these can be costly! Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. Galette's highlights occurred early in camp before the hamstring injury flared up. cheap china jerseys Given that it has been so long since he has played, the coaching staff places more value in seeing Galette play in the preseason than, say, tight end Jordan Reed, who missed almost cheap nfl jerseys the first month with a toe injury. Application of Textrol is quite simple really but assuming you have followed our advice of treating first with Seasonite and leaving the wood to weather for a year we would always recommend cleaning your wood and restoring it’s colour with Net-Trol first for the best results.Before starting, test the color choice on a small area. Allow to dry to determine final color (remember that this color will lighten over a couple of months to the final color). Actual coverage will vary depending on application method, type, texture, age and porosity of the wood. Once your surface is prepared, the application process is much the same as Textrol. Begin applying the D1 with a brush or roller (please note a sprayer is only suitable for maintenance coats and not for initial application in this case) and be sure to work in sections which you can complete in around 15 minutes (for fences this is relatively easy as you can just work in individual panels or 2 or 3 panel sections depending on your application speed – always work in whole panels though). As with Textrol, continue to apply wet-on-wet applications of Deks Olje D1 until the wood is saturated and ensure that it does not dry out inbetween coats. When Textrol is first applied it will leave the wood looking nice and rich. Over time this will fade into a lighter colour to give the finished look. Using this oil-based wood finish gives you the best of both worlds. It provides brilliant protection from the elements while enhancing the beauty of the wood.

Maintenance applications may be required approximately once every 2 years depending on the wood species, its age at the time of the initial application e.g. new or weathered and the colour used. Textrol HES will gradually lighten over time due to exposure to the sun and UV rays. penetrating wood oils which protect from within and are either clear or tinted and enhance the natural look of the wood

At Textrol Laboratories, our goal is not only to provide quality tensioners, but to provide quality service in all areas. Whether you need customer service, sales support, technical support, or field support, we want to ensure that you receive the service(s) that you need. NB– If you apply the product with a sprayer, it is a good idea to go over it lightly with a brush or roller afterwards for better penetration. Application Shake or stir can well before use. Use as is. Do not dilute. Apply 1st coat of Owatrol Textrol and allow to penetrate into the wood (15-30 minutes). Apply 2nd application and allow to penetrate into the wood (15-30 minutes). If required repeat this procedure until the wood is saturated i.e. will accept no more oil. Once the timber is saturated, brush out or wipe up any excess product that has not penetrated within 15-30 minutes of applying the last application to avoid shiny spots.