You can attach any electric trolling motor, or a gasoline power up to 2 HP. Attaching a motor which is too strong will damage the boat. Operator’s Manual – It contains instructions on how you can assemble and operate the Excursion 5 boat. Anyone who is looking for an easy-going, fun time on the water will surely enjoy Excursion 5. It’s straightforward to set up, and it only takes around 15 minutes to inflate, and you can get into the water.

When you take all things into consideration, it’s not hard to see why the Intex Excursion 5 is such a popular boat. No, the seats are fixed. The mounts built in for them don’t allow for either seat to be turned around. You can take them out entirely, however. If you’re ready to experience the exhilarating fun of go-karting, why not explore the full range of pedal go-karts at Outside Play today. For more must-have outdoor toys, don’t forget to take a look at our selection of quad bikes and ride-on toys.The motor has 3 reverse speeds and 5 forward speeds that will help you gain maximum control of the boat. This trolling motor also has a 6-inch telescopic handle and tilt twist tiller. You will need a battery and a battery box to power this trolling motor. About Intex Third, if you put a trolling motor on any boat, including inflatables, it must be registered and you have to follow boating laws. (You shouldn’t have to register it if you don’t put a motor on it)

Ride-on toys are designed to promote independence in your child, from the early stages where you help them balance and push the toy along to the time where they’re ready to operate it themselves. It’s a great way to develop their self-confidence and get them to use their balance and coordination skills. Our ride-on toys for kids are also great for promoting physical exercise and improving essential motor skills; they’ll also keep you on your toes as you race to catch up! The boat features an all-around grab line, which allows you to hoist the vessel from the car to the water and vice versa with very little hardship. Don’t forget that the boat weighs an unbelievably low 44 pounds, which is quite impressive given that its weight limit is 1,320 pounds. Took it out for river floating yesterday. So far everything great. Had a blast. No problems as yet. Definitely will put in a plywood floor, as it is hard to get in and out of. Over exposure to sunlight can cause the top ring to expand and become deformed. The fast set pools should not be placed in direct sunlight, unfortunately, this is not covered under the warranty. Fast Set Pool General Maintenance General Maintenance

Specs

This boat is perfect for bringing your furry friend along with you on your water adventures. The Excursion 4 is roomy enough, allowing it to fit up to 4 adult passengers while still having enough room for your other stuff. Also in the box is an Intex hand pump, which is one of our top 10 pumps for inflatable boats. It’s a double-action pump, putting air in as you push and pull. Using this will take some work, but you can blow up your entire boat within 15 minutes. Building a DIY hard floor may not be too easy, but it is doable. You just need to prepare a drop cloth, plywood, primer-sealer, anti-slip floor paint, and some outdoor carpet for a less slippery floor. You would need a foam tube insulator for the edges to protect the boat from the hard floorboard. After preparing all the required materials, all you have to do is use those handyman skills for good use and have an excellent hard floor. Swivel Chairs There are fittings for a motor mount at the stern of the boat in case you want to attach a motor for a speed boat feel. The grab line around the boat makes it easy to carry the boat and can serve as a safety feature: you can grab it if somebody goes overboard. Durability