Two unique Makita features contribute to the super-safe, low vibration benefits of this new, advanced machine The HR3210C has a new variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation. This action protects both the operator from physical injury and the machine from mechanical and electrical overload.The HR3200C series models have been developed as successor models of HR3000C, featuring low vibration level and lightweight design. Makita's "Active" dynamic vibration absorber creates a shift of air pressure in crank room and barrel room that actively controls the balancer HR3210CFeatures: Powered by an 850W motor generating 6.4 joules of impact energy, this Makita SDS will punch a 32mm hole into concrete with ease

This action protects both the operator from physical injury and the machine from mechanical and electrical overload This dramatically reduces machine produced vibrations. In addition to the advanced AVT system, this new Makita 5kg hammer features the 2-Mass fulcrum hinged rear grip handle and the vibration-damping side handle to further limit HAV risksPowered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, the new Makita HR3210C AVT will punch a 32mm hole into concrete and drive a 90mm CT core cutter The HR3210C has variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation Rotary action with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and demolition work In addition, 2-Mass fulcrum hinged rear grip handle and the vibration damping side handle to further limit HAV risks

Makita 240v 32MM SDS-PLUS Rotary Hammer in Plastic Carry Case - HR3210C Forcible Drilling and Chipping with Ultra-Low Vibration

Mon - Fri: 9am - 4pm

Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, S-MAK32C will punch a 32mm hole into concrete and drive a 90mm CT core cutter This 3-function machine provides rotary-only operation for drilling with a no-load speed of between 315 and 630rpm Torque limiter device that instantly disengages the drive should the drill bit or core snag during operationprotecting both the operator from physical injury and the machine from mechanical and electrical overload