Once placed, if the signal is not ideal, move the mesh points around a bit, trying to keep the face of the mesh point toward the router for best reception. Observe the mesh points' LEDs to verify where they are receiving the best signal. All networks will be different, but you can use the following tips as a guide to get you started: Initial configuration state: When the AmpliFi router is not configured (not paired), the router LED will be lit at the maximum brightness setting, and the 3 middle LEDs of the MeshPoints will flash. This type of router is becoming increasingly popular as it’s an easy to set up, and effective, method for ensuring that all the devices in your home can access the internet.

Selecting Router and MeshPoint Placement – AmpliFi Selecting Router and MeshPoint Placement – AmpliFi

The AmpliFi HD (High Density) Mesh Point features an adjustable super antenna. It can be used to expand the coverage of an AmpliFi Mesh System or turn an existing router or Wi-Fi cablebox into a powerful mesh network. Remote control requires either a Facebook or Google account; Ubiquiti does not support old-school Dynamic DNS (DDNS). Remote access can be very useful for a router, not so much for a repeater. I skipped it. Despite our reservations over the MeshPointHDs, the design of the Amplifi HD, especially the router, is very impressive, and if you’re an Apple fan, you’ll likely approve of the Cupertino-esque aesthetics. Performance The main screen on the LCD display will have the time and date. You can choose between 12h and 24h mode in the app by launching the AmpliFi app, and selecting the router icon to access its Settings. Then navigate to General > 24-Hour Time.Removing restrictions to pair AmpliFi HD (AFi-P-HD, AFi-HD-R, AFi-G) family devices to AmpliFi Alien. * If the MeshPoint LEDs or the signal quality bar in the AmpliFi app reflect that it needs improvement, you can move the mesh point closer to the router or keeping the MeshPoint in place, you can move the antenna around to receive better signal, trying to aim the face of the mesh point towards the router.

AmpliFi UK Model HD Home Wireless Mesh Point Adapter Extender

Plug in your AmpliFi router or MeshPoint. The MeshPoint will have the 3 middle LEDs flashing, indicating that the MeshPoint is ready to be added. The main SSID on these models, will automatically broadcast on both the 2.4GHz and 5GHz bands, and this cannot be changed. If you need to broadcast on only one of these bands, you can create additional SSIDs and select which band it will broadcast, either 2.4GHz or 5GHz . AmpliFi App needs Location permission only for these tasks - so Android allows the app to discover your AmpliFi router.

Wi-Fi not ready or connected: The router LED will be lit at the minimum brightness setting. The LEDs of the MeshPoints will light up in sequence from the middle outwards.