After playing a video, enter about://media-internals in your browser's address bar to check if hardware decoding was enabled for the most recent playback. Still, most likely, it will support OPNSense or OpenWrt or perhaps both because this board is ideal for working as a gateway protection firewall device to help protect local networks from cyber-attacks. The trick in my case was to remove the bridge0 interface between eth1 and eth2, and use these interfaces individually. com/2023/02/28/nanopi-r6s-rk3588s-mini-pc-router-review-part-2-ubuntu-22-04/ and if 2 RJ45 ports are sufficient, the NanoPC-T6 might be an even better option: https://www.

Unfortunately, I need to leave for a couple of months and therefore I won’t be able to play around more with the NanoPi-R5S, but when I’m back I would like to test it also in a K3S cluster. But if someone intends to run a server both questioning the numbers and switching to a better benchmarking mode is a great idea.to go into the graphical desktop – works perfectly but SLOWLY and I have one remaining issue – after a while the graphical screen times out – and asks for username and password – user is pi but it will not accept the default password – I need to stop that happening. Its compact size and abundant ports and interfaces make it popular in portable devices development, auto electronic devices, industrial applications, GPS systems and multimedia systems. I’m too much of a newbie to bring up linux on the NanoPi Series 6 so I’ll leave it to someone else to bring up. If ifconfig -a sees wlan0, but the hotspot is not working properly, try changing the channel and country code, an inappropriate country code can also cause the WiFi to not work.

In general I’m also curious whether R5S can be powered by a dumb 5V power source or a USB PD capable charger is needed. The installation is straightforward as I just had to loosen four screws to remove the bottom cover, install the SSD, and fasten it with the provided screw. After the OS begins to load, if the system LED is flashing and the network LED is on, it means the the OS has loaded successfully.In our arrangement in the photo below, we used a USB port for the power supply and an HDMI cable hooked to an external display panel. ports, an SD card holder and between the SD card the USB there’s an expansion connector for UART/SPI/PWM. com/t/how-to-flash-r5s/115; if you want to flash via USB , you need to prepare USB A-to-A cable, you also need power by 5V/3A .

These are driven by a Rockchip RK3568 system-on-chip with quad-core Arm Cortex-A55 CPU, Mali-G52 GPU, a VPU with 4K60 decode and 1080P60 encode, and a neural network coprocessor offering 0. I’d say we’ve already got every need covered by the DietPi-Bullseye image or the FriendlyElec Bullseye image that exist by now.Insert the SD card into your computer, go to the SD card's OS-related directory, and edit the file parameter. This article is a quick first impression review, but everything we tested with the NanoPi R5S worked well for us.