It prevents water damage, maintains the machine's operation, and keeps the water within. When should I replace the door seal? Expert Tip: One of the most common reasons for breaking seals is an accumulation of dirt within the gap between the door and frame. To prevent this from happening in the future, you may want to consider using a vacuum in between uses to gather up old tissue and debris from your door seal.

This washing machine door seal is a genuine Hotpoint washing machine spare part. How to Fit a Hotpoint Washing Machine Door Seal You should consider replacing your washing machine's door seal if you notice any signs of wear, damage, or leakage. The door seal becomes worn out, develops tears, or loses its elasticity. It traps the water inside the machine, preserving its efficiency and protecting your laundry space from possible water damage. What damages the door seal? This leads to water leaks during the washing process, compromising the machine's performance and potentially damaging your floors or surrounding areas. How do you replace the door seal on a washing machine? Over time, the washing machine's functionality is decreased and your flooring or the area surrounding it may be damaged. How do you replace the door seal on a washing machine?The door seal creates a watertight seal when the door is closed. It’s made of durable rubber or silicone material that is flexible enough to accommodate the opening and closing of the door. It ensures that water remains contained within the drum, allowing for efficient washing without any leakage or spillage. When should I replace my washing machine door seal? This washing machine door seal is a genuine Hotpoint washing machine spare part. It also fits Indesit washing machines. How to Fit a Washing Machine Door Seal This can be more difficult than removing the spring. As some models age, the inner spring can tighten and be difficult to loosen. If this is the case, persistence and perseverance are key to fitting the inner spring. Holding the tightening screw or nut in place at the top, inch the rest of the band onto the lip using a flat head screwdriver to fit the new door seal. Fit the new door seal Align the drainage holes at the bottom of the seal with the holes in your machine door. Install the inner spring/band Ensure the top of the washing machine is unscrewed and removed, to give you direct access from the top opening of the washing machine. Using a screwdriver, loosen the nut or screw of the tension band to remove the seal. Starting from the bottom, slide a flat head screwdriver beneath the spring and slowly and gently pry the spring from the drum. Find the drain holes on your old seal

Most door seals are fitted with a plastic retaining spring or band that will need to be removed away before the seal can be removed. Using a flat-head screwdriver, pry away from the around the rim and pull entirely off the seal. Some appliances may not have an outer spring on their door. If this is the case, your job should be a little easier! Fold the door seal into the washing machineThis washing machine door seal is a genuine Indesit washing machine spare part. It also fits Balay, Constructa, Neff, Pitsos, Profilo, and Siemens washing machines. How to Fit a Washing Machine Door Seal