The nose-mounted camera supports 4K30 video, like the Mini 2. While it uses the same Quad Bayer cameras as the Pro version, here you're limited to 12MP stills (48MP is not available). The 24mm f/1.7 lens still supports clip-on ND filters, 16:9 landscape and 9:16 vertical video, and ample upward tilt; it can go from straight down (-90 degrees) to 60 degrees upward. Comprehensive Coverage] DJI Care Refresh covers collisions, flyaway, water damage, natural wear, and other accidental damage. Connectthe DJI 30W portable charger to a power outlet or connect the USB Type C cord to a power bank. Verify that the input voltage ranges from 100 to 240 V.

Tested with a production model DJI Mini 3 Pro in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version. Connect the two-way charging hub to a power outlet using the official DJI cable and charger, such as the DJI 30W UBS-C charger. There are two ways that you can charge your DJI Mini 3 Pro battery: 1. Charging the DJI Mini 3 Pro Battery through the New Two-Way Charging Hub

Why buy from an official DJI seller?

Image Credit: DJI – DJI Mini 3 Pro charging hub. A step-by-step guide to charging your batteries through the Two-Way charging hub: For a serious upgrade in picture quality, you'll want to step up to a Type 1 sensor drone like the Autel Evo Lite+ or DJI Air 2S, or DJI's flagship Mavic 3 with its oversized Four Thirds sensor camera. We omitted the Mini 3 Pro from that list for a reason—although it offers up a 48MP photo mode, the extra pixels don't make a huge difference in picture quality, just file size. Moving up to a drone with a bigger image sensor is a greater difference maker for photography. Press and hold the power button on the aircraft or remote controller to power on or off the device.

You can tell the status of your device through the blinking patterns of the aircraft status indicator. Different color indicates different status of the aircraft, and the blinking frequency as well. Refer to the table below for more information about the aircraft status indicators. DJI Mini 3 does not have internal storage. It is recommended that you install a memory card to save the raw materials taken by the camera. This accessory can charge up to three intelligent flight batteries sequentially, which means one after the other. They are charged from high to low power levels.

In This Article

The battery will enter hibernation mode if depleted and stored for an extended period of time. Recharge the battery to bring it out of hibernation.

Smart RTH is initiated either by tapping the RTH icon at the left side of the app screen or by pressing and holding the RTH button on the remote controller. Flyaway Coverage] If a flyaway incident occurs, synchronize flight records and complete DJI Care Flyaway Aircraft Report on the remote controller, and simply pay the corresponding service fee to obtain a replacement product. Charge and discharge the battery about every three months to maintain good battery health. If the battery is stored after completely drained, it may over-discharge and be damaged.

A Versatile Camera for Creators

As DJI Mini 3 does not come with an adapter, please refer to the following content to select an appropriate adapter. APAS 4.0 is not available while recording4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps, and 1080p/120fpsvideo.

Regardless of whether you run it on a smartphone or the DJI RC, DJI Fly is the control app for the drone. It sends a view from the camera to your phone's display (or the remote's) and includes a touch interface to adjust settings, access different flight modes, and configure various safety features. The Mini 3 must be activated prior to flight; you'll need to set up a DJI account to do so, but it's something you can do from within the app itself. Communication: Intelligent flight batteries transmit information on voltage, capacity, and current to the aircraft. These data can be seen in the DJI Fly app. Auto-Discharging: When the battery has been inactive for more than a day, it automatically drains itself to prevent swelling, bringing the charge down to 96%. After nine days of inactivity, this will be reduced to 60%. Charging the standard battery with the DJI 30W USB-C charger should take around 1 hour and 4 minutes. This is 18 minutes shorter than what it takes to charge the battery of the Mini 2. DJI recommends that you fully charge the batteries every time you use them. To do that, only official cables and chargers should be used.Only fly in environments that are clear of magnetic or radio interference, buildings, and other obstacles. Temperature Detection: The battery will only charge when it is between 41° and 104° F (5° and 40°) to prevent damage. If the battery reaches 131° F (55° C), the charging process will end automatically. That is all for today, pilot! We hope that you have a better understanding of how to properly use your DJI Mini 3 Pro batteries. Battery cell damage protection: When a battery cell gets damaged, a warning will be displayed on DJI Fly.