Due to export control restrictions we are unable to export certain items overseas such as thermal imagers, riflescopes with magnification 9x or greater or featuring electronic processing, and night vision above a certain specification. It's important to know that due to state and local laws, there are certain restrictions for various products. I have stripped screws and threads on the mount, had to take a hammer to one to remove from my air gun and just got the third one because I have not been able to find something better.

Dovetail To Picatinny Rail Adaptor 150mm 11mm/13mm Dovetail To Picatinny Rail Adaptor

The last ones I used were the 46mm/ four slot version of the low profile adaptor like that posted by 2L8 above. By a FAR margin, the EAGLEVISION is much better made, much better machined (more accurate), and overall, a MUCH better fit on every 11mm rail that I've fit them to. We will introduce you exclusively to Omni Capital Retail Finance Limited finance products provided by Omni Capital Retail Finance Limited through the Deko platform.

I tried putting it on an Airforce Texan to use Picatinny rings to mount the scope, and it just would not grip the rail. We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. Be sure to measure your rings to see if they are true picatinny or weaver and also check the adapter. The dovetails to Picatinny adapter mounts have been tested for fit on air guns such as Air Arms and the adapters work better than expected. Ce montage est donc facile à mettre en place, à condition bien sûr de lire et de comprendre les instructions de montage.

picatinny adapter - Airgun Nation Best or recommended 11mm to picatinny adapter - Airgun Nation

Tighten all the 4 small screw and the 4 long ones ( so it spreads it more so you can mount it on the dovetail rail on your gun, once you mounted it, losen and take off all 4 long screws and all 4 short screw on the sides they were on, once you take them off, take the 4 long screws and screw it to the side were the other 4 short screws were on, this is how you tighten it so it would be nice and sturdy on your gun.The rail is fitted with a single recoil stud on the underside, which can be fitted to any one of 4 pre-drilled locations, or removed completely if the rifle has no provision for a recoil stud. The rail attaches to an 11mm dovetail with two side clamps, tightened with the included Torx wrench.

Weaver Dovetail Picatinny Rail Mounts | Sight Base Rails

come number three, new, mounted the way I intended and have everything set up the way I wanted but have no plans to every remove it or move it.The rail comes very tight and with spreader bolts much like be much like BKL The rail comes very tight and with spreader bolts much like be much like BKL and the quality is very comparable aswell. The Hawke Dovetail to Picatinny adaptor allows you to attach most night vision riflescopes to your air rifle, rimfire or . On my 50 Texan with heavy recoil the only adapter s that held up to the recoil are the Airforce BKL adapters. This UTG mount is essentially a much cheaper alternative that gives you a picatinny rail, as opposed to the corresponding BKL part that is simply a dovetail riser. That is a total of 5 dovetails + Picatinny, in addition to dovetails and weaver adapter mounts that feature all 3 such as 30mm dovetails, and keymod dovetail combinations.