Step 2: Clean and dry the surface where you want to install the light strip to ensure the Led Light Strip sticks to the surface. Be careful to only cut along the cut point, as cutting too close to the LED lights will prevent them from working. The contact points, which are right next to the cut line, are the dots where you’ll place the wire to be attached. Turn off other Bluetooth devices in the area or move the light strip to a different location to remove all interference. Interference from other Bluetooth devices may also cause connectivity issues with your Ksipze LED light strip.

If your LED lights are super close together, you won’t be able to use a fold-over connector because it won’t have enough space to close.

Step 3: Connect the power adapter to the light strip, making sure the positive and negative terminals are aligned correctly.

If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. If the Led Strip is not properly plugged in and doesn’t have power then your Ksipze may not be able to connect to Bluetooth.

Troubleshooting your Ksipze LED light strip can seem daunting at first, but by following the steps outlined in this article and checking for common issues like power supply, connectivity, and faulty components, you can quickly fix the problem. To connect your LED strip lights, you can either use a connector for easy attachment, or you can solder the wires to the strip, which carries more current and creates a more stable connection. Quick connectors can be purchased along with LED lights and are hassle-free ways of completing the electrical circuit. With over two decades of experience, he specializes in troubleshooting issues and maintaining residential electrical systems.

Product line is LED Lights，including LED Strip Lights, LED Corn Light, Led Spot Lights,and other LED bulbs,etc.

Don’t worry because Ksipze Light strips just like any electronic device can run into issues that prevent the lights from functioning properly. CN Coterie specializes in full home renovation, electrical, plumbing, carpentry, cabinetry, furniture restoration, OATH/ECB (Office of Administrative Trials and Hearings/Environmental Control Board) violations removal, and DOB (Department of Buildings) violations removal. If your desired measurement doesn’t perfectly line up with marked cutting spots, you’ll still need to cut along the designated lines to ensure your lights work. No matter which type of connector you choose, you’ll still slide the end of the light strip into the open end of the connector after you’ve cut the strip correctly.

The Ksipze Led Lights Strip uses the ‘HappyLighting’ App to control the Light Strip with your Smartphone. Step 4: Clean and dry the surface where you want to install the light strip to ensure proper adhesion. Step 5: Peel off the adhesive backing from the light strip and press it firmly onto the surface where you’ve cleaned and prepared.Always cut your strip on the line between 2 sets of copper dots so you can easily connect it to another strip or a power source. A slip-on connector will have a gray or black button on each side that you press to lock the strip in place. Plug the wires into the connector, then turn the connector’s screws clockwise to hold the wires in place.