Whether you have a Commander XT or not, you must use the Commander Core with the Elite Capellix series AIO units. Power, control, and RGB is routed through the Commander Core to supply the pump and OLED face plate. This is also why the Com Core comes in every box. The XT is a sibling device, but instead of the AIO power delivery it has an extra LED channel and some temp sensors. I have exhausted all remedies that googling has revealed. I have only one option left and that is a 9-pin internal USB to USB 2.0 converter cable that I am waiting to be delivered to see if plugging the device into an external USB slot will solve the problem. This seems like it should be OK to me, but I was curious how icue would know which fans were specific to the Aio and if it was really OK to connect the case fans to the remaining empty ports (or if the included commander core only had 6 ports for the situation of using 3x push/pull on the 360 aio) I'm teaming this with i5 10600k and RTX3060ti already running on my system. I'm just moving to new case, PSU etc. yes the commander core and pro are different, if you dont think so then you are an idiot. the Core can handle 6 fans completely with the PWM and RGB. the Pro can handle 6 fans for power, 2 for RGB 4 temp sensors and 2 9 pin internal USB hubs.

Corsair Commander Core XT Faq and Diagrams. Corsair Commander Core XT Faq and Diagrams.

Every Corsair RGB Hub (whatever the kind) has room for 6 fans, so if you have a RGB Led Hub and a Lighting Node Core you will be ok any kind of fan you have (be aware that if your 7 fans are let's say LL and QL, you will have to connect each kind of fan to a different hub). Mixing different fans on the same hub can bring weird effects.I bought an NZXT internal USB hub: Neither the Commander Core XT nor the Lightning Node Core have been detected, no matter what other configs I tried on the USB-Ports. The NZXT hub does not detect the Corsair Hubs. When I plugged my Gigabyte Aio on the Hub, it has been detected. So the hub is working, just not with the corsair products.

Update device firmware with iCUE – Corsair Update device firmware with iCUE – Corsair

The first time I set the system up the 6 QL 120mm Fan light wasn't working, but it was powered and the fans are (Blowing Air) The NZXT powered usb hub isn’t working? That is the usual solution for AMD owners with lower voltage on the USB ports. How many other devices are connected to the hub? I also would reinstall your chipset drivers for the MB that control the usb traffic. If this started after an OS upgrade/update, a glitch there is certainly possible. Mi idea es comprar otro Commander XT y conectarle 6 ventiladores QL120 (204leds), la bomba XD5 (10 leds) y el bloque CPU XC7 (16 leds) en serie a la entrada RGB. Zotty ok so I have the Corsair 5000D Airflow, the H150i Capellix 360 AIO, and 10 extra ML 120 fans (total 13 fans) 3 RGB front and 3 RGB side, original 3 RGB AIO set to push inside the top mounted Rad set to exhaust, 3 non RGB in pull on top of the rad and 1 non RGB as rear exhaust. The 6 on the Rad are all connected to the Com Core as well as the rear fan via an PWM splitter.Intelligent fan detection simplifies the fan setup process, allowing iCUE to automatically identify the specific fan model connected to each RGB port. Mi pregunta es la siguiente: ¿Si conecto 6 ventiladores QL120 (34x6=204 leds + 160 leds de las tiras = 364 leds. Commander XT soporta 264 leds), funcionarían todos los leds? Buy a couple of selfpowered fan hubs (like the one you linked) and group each radiator's fan so they act the same. This will take up 3 CoPro's ports. Otherwise I do not know what to do. Obviously the Commander Core is the ideal product because I would rather have just two sata devices plugged into my case instead of 4 or 5.