If that does not work or you do not have a Mr. Clean Magic Eraser, wet a soft cloth with water and a mild detergent. Dawn works well for grease stains. Make a warm water soapy solution with a squirt of washing-up liquid or a dedicated liquid window cleaner in a bottle (not the spray type). Interesting suggestion, Gaylord. Unfortunately, the product that you suggest is intended for use on clear-coated auto body paint, and is not meant for use on plastic (or ceramic). Please keep in mind that this is not a food-safe compound, and should never be used to plastic containers, or other items used in the kitchen. As a less harsh alternative, I would suggest vinegar to scrub your sink. Voila! No more stains. Reply When you’re desperate to get rid of a smudge on your glasses, it might seem like a good idea to use your own saliva to lubricate the lens.

Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity. Suitable for most, coated surfaces – they recommend using a small area of the surface you wish to test first For a more aggressive application on, for instance, a car headlamp cover, you could use 400, 600, and 2000-grit sandpaper. [9] X Research sourceMy mix of herbs has discolored my plastics and this will help. Baking soda seems to have various uses in my kitchen as I often keep it in a corner of my fridge to absorb any bad smell. Thanks for sharing this. Reply

Run the frames under warm water. Use a mild soap, like lotion free-dish soap, and apply it to your frames using your fingertips. Like vinegar, lemon juice is acidic. A lemon’s natural acidity cuts through challenging limescale buildup while also disinfecting the surface. Compared to other stain removers, lemon juice does demand a little more elbow grease. Dissolve one tablet in lukewarm water, wait for it to fully dissipate before attaching the spray nozzle. For stubborn stains, wait 10 to 15 seconds before wiping clean As mentioned above, if the frame has been damaged by an abrasive product, a scouring pad or years of using a cream cleaner then uPVC will be full of fine scratches that make the frame look dull and discoloured. If this has happened there isn't anything you can do that will make the frames shiny white again.All water-cleanable surface, treated wood, painted or glazed surfaces, treated stone, plastic surfaces, tiles, and worktops To restore your food storage containers to their original state, use rubbing alcohol. Rubbing alcohol cuts through tough stains while also disinfecting the container. Though time frames differ depending on the application of the material, we recommend giving your polycarbonate a good clean twice a year. Obviously, for protective screens and windscreens, cleaning should occur more often. Dirty paw prints should easily rinse off the paneling like they do other surfaces (tile, linoleum, wood, etc.). If you’re having to scrub, that likely means that either the paneling is porous and the dirt is getting into the pores, or the paw prints have fully dried. The latter problem can be fixed by spraying the wall with water or cleaner and leaving it for a few minutes to soften the dirt residue so it can easily be wiped off.