The holding weight for Gorilla Mounting Tape is based on objects with a maximum depth of 19mm. Objects over 19mm in depth put more stress on the bond and have an increased chance of failure.

With correct usage and optimum conditions, you will need approximately 23cm of Gorilla Mounting Tape Crystal Clear per 1kg of weight. Gorilla Mounting Tape is a permanent tape and may cause surface damage or leave residue if removed. If Mounting Tape must be removed, the mounted object should be removed first, which is best be achieved by prying from one corner. Mounting tape can then be removed by slowly stretching the tape away from the surface. The liner should be removed once the tape is applied to the surface. Lift the liner from the corner using your fingernail (the edge of the product blister card can also be used). Liner can also be removed by pinching and stretching the corner of the Mounting Tape at a 40-degree angle to the surface, until the liner lifts.Gorilla Mounting Tape is best applied at room temperature. Once cured Gorilla Mounting Tape can hold strong between -40°c to 120°c.