Tänk även på att kylaren är väldigt tjock gämfört med standard 52mm denna är totalt 63mm tjock med fläktar. We understand that most of our viewers only have two hands and are unable to deploy their fourth-dimensional abdominal hands, so although we could do this, we wanted to keep it realistic for the audience. if they need to be on full speed to keep your CPU at a reasonable temperature, something is probably wrong.

Some mention that it's easy to install and the instructions are clear, while others say that it can be a little confusing to install.Not a big deal since laying the board flat on the table bypasses it, but this could be even easier if Arctic refined the solution with cap screws.

The pump's main problem is a high pitched buzz around 1550+ Hz, plus the pumps housing resonating/vibrating with anything it touches. This puts it about equal in thermal performance to the NZXT Kraken X62 and X72, which run around 51-53dBA, or a perceived noise increase to the human ear of about 2x.The series is equipped with a high-density water microchannel and copper finish block to offer efficient thermal conduct along with an Aluminum fin to maximize its cooling performance. Liquid coolers take longer to reach equilibrium than air coolers as a result of their water capacity that soaks rapid heat changes better. And again, please also remember that case configuration is the single most impacting to VRM thermal performance outside of the VRM design and cooling solution. Tom's Hardware is part of Future US Inc, an international media group and leading digital publisher.

The instructions are sparse and it can take some time to mount the pump on the CPU as the AM4 backplate is not held on once.They mention that it's easy to fit in a Fractal Designs R6 case, the noise levels are very low and does not get annoying.