If you want to use a decking screwdriver or the 15 dollar dimpler, you can use whatever bit you need as they are removable. I don’t build decks or hang drywall for a living, but I’m sure I’ll have some uses for a drywall screwdriver in the future.

The professional blue power tools from Bosch are engineered for excellence – meeting the highest standards in speed, precision and robustness for great, professional work results. Obviously the simple collared bit wears out fast and strips the screws a bit, but they're cheap, and they work almost as well as the clutch type. With square-drive, you may have to turn the drill 45° before it engages the screw (since it 4-sided) whereas the star-drive seems to simply "find" the screw.

It goes onto the chuck of a regular drill and has a spring loaded collar that sets the screw at a certain depth.

I'm sorry unless you do it often enough you just don't get that ability to put on the drywall mud with a nice even coat.

However, if we do not receive the full minimum due on a statement within 59 days of the date of that statement, or any event of default (other than a payment default) occurs under your Cardmember Agreement, all special payment plans on your account will terminate and (i) you will then be charged interest on the balances outstanding on such plans at the applicable regular annual rate from the day after the date of your next statement, and (ii) the balances outstanding will form part of the balance due on that statement. I havent use dimpler yet but after quick test was working great which will enable me to erect drywall a lot faster than before.

This enables EDMA to grasp their needs and feedback, which is incorporated into the development of ever more efficient tools. Different areas of the wood will have different resistance, so the clutch won't be a consistent gauge.A different type is simply a bit with the collar around it so that the bit will cam out when it makes contact with the DW. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . TM Unless otherwise noted, all trademarks are owned by Canadian Tire Corporation, Limited and are used under license. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

CANADIAN TIRE® and the CANADIAN TIRE Triangle Design are registered trade-marks of Canadian Tire Corporation, Limited. I used to use a long-handled knife and my two-foot-long Yankee driver to prep ceilings without needing scaffolding. For most DIYers who aren't driving screws 8 hours a day this is probably acceptable, or at least worth a shot. Sometimes, I'll just run my drill/driver on the drill setting, and set the clutch, so that it starts slipping when the screw is close to full depth.NOT adjustable but it sets the screws NICE AND FLAT , easily making thenm coverable with joint compound . Load a drywall screw, let the drill do the work and the bit sets the screw mint, the clutch kicks in easily, easy peasey. The tire producer / manufacturer and Canadian Tire uses this fee to pay for the collection, transportation, and processing of used tires.