Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

The same patch cable can then be used to validate the correct cable using the Cablemap feature on the IntelliTone Pro LAN 200 probe.

Using the body to conduct the signal is a good way to move the probe away from noise sources and identify individual wires when metallic contact is possible.

In this case, it may be difficult for IntelliTone to differentiate the PBX signal from the IntelliTone signal.

The IntelliTone Pro 200 LAN Toner features a service ID indicating the presence of service on the line. Digital toning is especially helpful once the cable has been located as it displays cable wiremap and checks for shorts, opens and miswires.Once the cable is located, the IntelliTone Pro 200 LAN probe provides a Cablemap to assure correct pin-to-pin wiring. This solution allows the most elusive, hidden or bundled voice/audio, data and video cables and wire pairs to be located and isolated quickly and reliably, even on active networks.

Unlike traditional signals, the IntelliTone digital signal stays strong despite common mode termination.

The probe signals via audio and LED visual indicators to help with noisy environments, whilst the simple thumbwheel aids selection of the desired toning mode. When the pair under test is not terminated, the copper conductors can be touched together briefly to cause a short.

The telecom 5-way Alligator Lead Set also offers a secure attachment to 66 blocks using the U shaped nose for blade-shaped terminals. The presence of Ethernet indicates the connection is active and best located on the patch cables from the patch panel to the switch. Get advanced vision for locating cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment. Unlike analogue signals, the IntelliTone digital signal stays strong despite common mode termination.If the jacks are very closely spaced or it is difficult to insert the probe tip in the jack, there may only be one or two levels of signal strength difference. The block may be directly connected to the PBX if this is the main distribution frame (MDF), or cross-connected to another location if this is an intermediate distribution frame (IDF). Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity. Toning - IntelliTone makes it easy to quickly locate the cable in the equipment closet when performing moves, adds and changes. That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting.