Mitre Shears/Mitre Angle Trim/PVC Decking Cutter

Product Information

Bien que la lame soit de qualité (fil toujours intact après un usage intensif), les pièces épaisses de plus ou moins 4-5 mm en bois dur devront être entamées sur plusieurs faces. other cutters such as the drawer lock cutter are more appropriate – the lock mitre is the heavyweight of corner joints.

As with all corner joints, your boards must be prepared so that they are flat and square across the ends. Precise set-up is essential to get good results with this cutter, and the set-up is specific to the thickness of your workpiece. This fixes the final fence position and you can now bring the fence forward to make a light first pass, then move it back a little for the second pass, and so on until the final pass is made with the fence back against the stops.Keep Hands Clear: Keep your hands and fingers away from the blade area at all times, even when it is not in use. Capable of cutting a wide range of materials such as laminate, wood and metal, mitre saws are versatile, multi-purpose tools. It gives cleaner cuts on long grain than end grain and comes into its own with substantial carcase work such as large loudspeaker cabinets.

This saw is equipped with a blade that can tilt in addition to the typical angled cutting capabilities of a mitre saw. Whether you’re looking for extendable sides that can be adjusted to suit your workpiece or a rolling stand that’s easy to manoeuvre, choose from our array of universal mitre saw stands. One way to overcome this is to make a right-angle jig to hold the workpiece in a vertical position as it is passed over the cutter. Note that very slight adjustments of your fine adjuster will affect the fit of the two pieces so proceed in small steps.

Mess is also kept to a minimum with dust collecting bags, along with all of the safety features you expect from top brands. For larger boards, a length of batten clamped across the board and running on the top of the fence helps, especially if used in conjunction with horizontal featherboards. These saws are designed to make accurate and precise cuts, making them ideal for both professional and DIY use. It is particularly good with heavily figured wood where the grain pattern is carried round the corners, and for veneered boards such as oak-faced plywood or maple-faced MDF.

Angle Adjustment: When adjusting the cutting angle, be cautious and ensure that all screws are properly tightened before making any cuts. Practice this procedure until it becomes familiar, and you’ll be able to quickly home in on the exact settings for other thickness materials. Pulling the blade through the material can be dangerous, it will give a worse cut and is likely to damage your blade. Made from high-quality hardened and precision ground steel, the Durston mitre cutter jig is designed to make mitre cuts a breeze.All Evolution Mitre Saws have can be connected to powered dust extraction systems to help keep your workspace clean. These are adjustable and can be moved inwards and outwards to accommodate various blade cutting angles. A Double Bevel Saw can rotate both left and right, about the vertical plane, to make bevel cuts on both sides without having to flip the workpiece. These saws are ideal for making complex, decorative cuts on intricate work, such as crown moulding where cut angle precision must be exact in both directions.