Elgato Cam Link Pro, Internal Camera Capture Card with 4 HDMI inputs, Stream and Record 1080p60 or 4K30 for Video Conferencing, Teaching, Streaming, Broadcasting on OBS, Zoom, Teams with Multicam, PC

Product Information

I do think the Camlink Pro only supports 4k30 when using NV12, and that the issue was created by OBS defaulting to YUY2 or something which made the source 1080. Card say : 1920x1080 60 fps - this card can't change resolution in the fly, many card can't change up from received 30 fps to 60 fps in lower resolution. Picture in Picture, Side by Side, Triple, or Quad choose your Multiview layout in Elgato 4K Capture.

Remind that your machine must be capable to handle all stuff including two times of rescaling (upscaling the cropped part, then downscaling all to output size). Cam Link Pro equips you to capture four HDMI signals from cameras, computers, laptops, tablets, and more. The OBS log file shows the source as 1920x1080p, which doesnt match what anything in the UI says about the source. If you look VERY closely, you will notice that this image, is 1/4 the resolution of the Elgato Capture Utility image, i.New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Run original software for this grabber and check value on sender and receiver, now run OBS and check. Also bonus tip: I found if you're using NVIDIA Broadcast and you want to 'break/hack' the restriction of eye contact (beta) for 4k, all you have to do is have the NVIDIA Broadcast software installed and the eye contact effect turned on to one of your default system cameras before installing your cam link pro drivers/4k utility program.

What I want is for only the top-left 1920x1080 pixels of the 4k source to take up the entire canvas. For some reason, OBS is unable to correctly grab the video format from Elgato 4k Utility application is sending. So if I'm interpreting this properly- OBS will enforce auto-scaling a 4k Video Capture Device source down to whatever the base resolution is set to?Because i think macbook lower resolution because card send info about hdmi resolution and system set max resolution at 60fps. Ask your Support Technician about additional options available through our exclusive Priority Care Program. And going back to beginning if you see in OBS (logs) this resolution 1920x1080 and FPS 60 - your source send 1920x1080p60. First of all, make sure you have 4k utility program installed and have selected the appropriate dimensions for your inputs for 4k in that application.

Stream or record in 4K or 1080p60 Full HD, control video feeds separately in broadcast software, and add four cameras to video streaming apps. I am seeing 1) 3840x2160 as the resolution in the OBS source properties, 2) 3840x2160 as the video resolution in the camlink device properties, and 3) I am definitely getting a 3840x2160 output everywhere other than OBS, but 4) the logs from OBS are showing the source as 1920x1080 (even though the properties menu shows 4k).

jpg file attached to my first message), and somehow it seems to be getting set to 1080p elsewhere by OSS. I've tried deleting and recreating the video source several times (with and without restarting OBS inbetween) and unfortunately, that didn't seem to help.