Cryorig CR-H7A Tower Cooler For AMD/Intel CPU

Product Information

The Cryorig H7 is a stellar performer at this price point, and may have the nicest build and finish among its competitors. you owe it to yourself to heavily consider this as an alternative if looking for CPU coolers on a budget- you certainly won’t be disappointed." The Cryorig has supplied a QF120 fan with the cooler. Fan’s dimensions are 120mm x 120mm x 25.4mm. Weighing 134gm, it has rated speed of 330~1600 RPM with the noise levels of 10~25dBA and 49CFM airflow.

I’m amazed by this cooler, it’s design and performance are pushing way above what I would expect for this price range."

It is a 120mm heatsink, single tower with a height of 145mm which enables it to be fitted in the majority of the PC Chassis out there in the market. Let’s take a closer look on the cooler. CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet that allows for extra air intake. The additional air intake allows the QF series fan to have a higher air output volume for its fan diameter, which equals better temperatures for the CPU heatsink and more air exchanged for the PC Chassis.

El Cryorig H7 es quizás uno de los mejores disipadores semi-compactos que podemos encontrar en el mercado" CRYORIG again does not disappoint us, the H7 is worthy to be part of the family ... despite a rather small dimensions"Beating out the similarly priced mainstream favorite in the Cooler Master Hyper 212 EVO by around 5%, its peformance-per-dollar rating is exceptional."

The cooler comes with a plethora of accessories which enable the users to install the cooler without worrying about any additional requirement. The user manual is well laid out and pictures are elaborative to help the installation process. Accessories include: As an effective anti-vibration measure, four rubber dampeners are embedded in the 120mm fan at the corners. This dampens the vibration transmission of the fans to the fins. The Fan QF120 has an extraordinarily quiet bearing itself, so that the noise level of the entire cooler is low 25 dB (A). In addition, the QF120's housing has four additional ventilation slots, which further increase the fan's performance. Thanks to its outstanding performance and efficiency, the CPU tower cooler Cryorig H7 is suitable for processors with a 140 Watt TDP (Thermal Design Power). Asus Realbench 2.44 and the RealTemp 3.70 are used for the stress test and the temperature monitoring. The Noctua NT-H1 thermal paste is used to test all the coolers on my test benches. This helps ensure the standardization and to reduce the effect of any bundled thermal paste that could benefit the performance. Methodology PC cooling and peripherals innovator CRYORIG announces their collaboration project with NZXT, the software controlled RGB LED H7 Quad Lumi will be releasing this June.It is highly advised to use a diagonal pattern to better mount the cooler. Do that till the thread on each screw runs out. Attach the fan with the cooler and connect the 4-Pin PWM connector on CPU fan header or any fan header of your choice. This cooler can be used in Push/Pull configuration for which an additional set of fan clips is provided by the Cryorig. The motherboard that I am using on my second test bench is the Asus Z170-P being powered by the Intel 7700k.

The right side of the box has mentioned three salient features of the cooler like Hive Fin design, Zero Interference, Infinite RAM compatibility and ease of installation within 4 minutes. This is H7’s Heatpipe Convex-Align™ System that allows for more heat pipes in a given area, optimized heat pipe placement in the copper base, and improved alignment with the CPU. With the Heatpipe Convex-Align™ System, each heat pipe functions to their maximum TDP capacity. The cooler has the height of 145mm and it is compatible with the majority of the PC Chassis out there in the market. Going this route, the Cryorig is targeting the majority of the users in the overall market. How will it perform and will it be able to calm the nerves of the hot chip from the Intel aka 7700k? Let’s find out.The cooler has the dimensions of 98mm x 123mm x 145mm (L x W x H). In height perspective, cryorig h7 review cooler has a slim profile. The top side of the cooler is what makes it differentiated from the rest of the competition. Not only that, but the offset design implementation has made this cooler to have infinite RAM compatibility. I did not see any incompatibility with respect to the first PCIe lane. The Compact Tower That Fits. Price to performance is unbeatable! If you are on a budget and do not want to loose any cooling capabilities look no further because the H7 will exceed you expectations!" Assisting airflow to move directly through the full length of the heatsink and carrying out hot air. Fins are made of aluminum. The front side has a picture of the cooler printed all over it. The brand name is printed in white color on the top left side. The feature sum of the Cryorig H7 is printed on the bottom side.