A good fan control application makes it easier to tune the CPU and GPU fans for maximum performance with minimum noise. Keeping this in mind, we have listed some of the best fan control software that you can use. MSI Afterburner (For Windows) The RPM of the first fan connected to the fan slot is read and returned to the system, setting PWM signal synchronously to all fans. Included in the box you'll get two adhesive EVA pads, two adhesive magnet pads, and a SATA cable. When your system needs cooling, all of the fans will work at the same time, however, if you only want some of your fans to spin, you'll need to disconnect them. With static color changes, you choose one color that is retained permanently (until you change it again). For example, give your PC lighting an orange or blue hue. This german software can control every case fan connected to the motherboard. You can also make your own fan curve configuration. Like SpeedFan, it uses SMART sensors to display HDD/SSD temperatures. Including all this, it also displays real-time CPU/GPU temperature. An RGB port is also present to connect an RGB LED Fan Hub to connect Hydro X devices, CORSAIR RGB LED Lighting PRO Expansion Kit, or LS100 lighting strips.

A fan controller is probably the last thing that comes to your mind when talking about PC accessories. But if you have a bunch of case fans, you can greatly benefit from having one, especially if your motherboard has just one or two fan connectors. Getting the best fan controller for your needs allows you to optimize the airflow inside your case, control the fan noise, and even control your RGB effects (on some controllers).Two included temperature sensors can be used to accurately monitor temperatures inside the case. The iCUE Commander Core XT is powered by a SATA power connector directly from your power supply and must be connected to an available USB 2.0 header on your motherboard.

pin headers contain 2 connectors for current and grounding and a third connector that relays information to the user about the RPM of the fans for monitoring purposes. 3-pin connectors can have their RPM modulated by adjusting the voltage sent to the fan, although this method isn’t as precise as 4-pin controllers. FanControl is one of the best free fan control applications on the market. This application was developed by a single developer, Remi Mercier . This simple but elegant application controls all your fans, including case fans. However, you cannot use the application to control the colors on your RGB fans. You can choose three settings to control your fan speed: Auto, Manual, and Advanced. Auto is the default setting. Manual settings allow you to set the speed (in%) according to your need. The fan will spin at the set speed regardless of the graphics card’s temperature. Selecting the Advanced settings, you can set the fan curve according to your need.The Noctua NA-FC1 can deliver up to 3A maximum current, so having multiple high-RPM or RGB-lit fans won't be an issue. Users can choose between two modes, manual or automatic. This means PC builders can use PWM-based controls without having to use the motherboard's fan control software. On top of this, there's a No Stop mode which enables fine-tuning of fan speeds for near-silent operation. Flexibility:Normally, computer fans are not particularly calibrated to respond to the computer’s internal state. As a result, most of the time your fans are running more than they need to be.