VIPMOON Wireless Bluetooth Controller,SP105E Magic Controller Bluetooth 4.0 2048 Pixels iOS/Android APP for DC5V-24V WS2811/WS2812B/WS2801/SK6812/APA102/6803 IC LED Strip Pixel Module Panel Light

Product Information

Flashing the firmware can be done with esptool.py --port COM6 write_flash 0x000000 firmware.bin. Differences between controllers Controller File “/usr/src/homeassistant/homeassistant/helpers/entity_platform.py”, line 558, in _async_add_entity You can find this controller for very cheap here: https://www.aliexpress.com/item/4000773623427.html?spm=a2g0o.productlist.0.0.4f09329cJ7C1H4&algo_pvid=542e757b-587f-4540-8652-2195883f1349&algo_expid=542e757b-587f-4540-8652-2195883f1349-0&btsid=0bb0622a16012309671478585ed4bd&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ Make sure your phone Bluetooth is on and open the APP, select device name "SP110E" to connect the controller.

Controller: High-level SP110E asynchronous controller. Use it only in asynchronous environment (with asyncio) No ‘version’ key in the manifest file for custom integration ‘sp108e_ws2815’. As of Home Assistant 2021.6, this integration will no longer be loaded. Please report this to the maintainer of ‘sp108e_ws2815’ To flash firmware to the controller, you can use any ESP programmer module or other UART Serial adapter with 3,3V. Connect RX, TX, GND and VCC (3.3V!) between the programmer/power source and the ESP chip. To flash an ESP, you also have to connect GPIO0 to GND at boot time to enable the programming mode instead of starting the flashed firmware. See the corresponding pins at the image provided above. User-friendly design: MAX 2048 pixels (Recommend 1500Pixels)in total. Save user settings when power off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot-swap protection B. STA(Station) mode: Controller and phone are in one same WiFi network, in this network, users can operate the controller smoothly.

Install

Support IC Chip Type: the pixel controller support almost all the one-wire or two-wire LED driver ICs. Such as WS2811/ WS2812B/ WS2813/ SK6812RGB/ SK6812RGBW/ SK6812/ SK9822/ APA102/ LPD8806/ UCS1903 3pin male LED String Light/Panel/Strip etc. (Not support RGB or GRBW led strips without IC) ControllerSync: Synchronous adapter for high-level SP110E asynchronous controller. Handy tool to use from Python shell or synchronous (normal) environment User-friendly Design: Support setting pixels number, control up to 1024 pixels in total. Save user setting when power off; Reverse connection protection; Small and convenient, the light effect is vivid and beautiful. WIFI Group control: Sync multiple SP108E's together even if the led strips are in Different areas. It only works with a 2.4G WIFI network. DON’T use 5G WIFI network. IOS 10/Android 4.4 or later version.

Safety DC5V~24V: DC5~24V wide working voltage. The led controller can’t regulate the output voltage at the VCC, so the input voltage of the controller must be equal to the working voltage of the led strips. 5V power supply for 5V led strips, never use 12V or 24V power supply, otherwise your lights will be damaged. Support IC SM16703 UCS1903 WS2811 WS2812 WS2801 WS2813 WS2818 SK6812 SK6812RGBW TM1804 TM1914 TM1814 TM1913 LPD6803 LPD8806 SK9822 GS8206 GS8208 TX1812 TX1813 INK1003 APA102 APA105 P9813 P943S P9411 P9413 P9414 P9412public static final String[] e = new String[]{"FREQ_USER_COLOR_0", "FREQ_USER_COLOR_1", "FREQ_USER_COLOR_2", "FREQ_USER_COLOR_3", "FREQ_USER_COLOR_4", "FREQ_USER_COLOR_5", "FREQ_USER_COLOR_6"};