Amazon Basics USB Type-C to USB-A 2.0 Male Cable - (0.9 Meters) - Colour Black

Product Information

Some USB-C cables feature a chip or e-Marker that contains information the device reads. This two meter cable’s e-Marker is incorrect. Obviously, as a charge cable it’s terrible for data transfer and can’t drive Thunderbolt devices nor your monitor, but as a charging cable it’s excellent. a b c d e "USB Type-C Overview" (PDF). usb.org. USB-IF. 2016-10-20. Archived from the original (PDF) on 2016-12-20.

Chargers that don't have a standard USB Type-C connector might use a proprietary, nonstandard connector that your PC doesn’t support.

FASTER DATA TRANSFER

Chris Hoffman is the former Editor-in-Chief of How-To Geek. Chris has personally written over 2,000 articles that have been read more than one billion times---and that's just here at How-To Geek. Select the Start button, then type device manager and select Device Manager from the list of results.

CalDigit USB-C Cable". 2018-09-21. Archived from the original on 2018-09-21 . Retrieved 2018-09-21. Dust or dirt inside the USB port on your device might be preventing the charger from being inserted correctly. However, to connect a USB2.0/1.1 device to a USB-C host, use of Rd [57] on the CC pins is required, as the source (host) will not supply V BUS until a connection is detected through the CC pins. Make sure the device or dongle is connected to the USB-C port on your PC (or phone) that supports the features of the device or dongle. For example, if you're connecting a Thunderbolt device, make sure it’s connected to the USB-C port on your PC (or phone) that supports Thunderbolt.MHL Alternate Mode over USB Type-C to support superMHL". www.mhltech.org. www.mhltech.org. 2015-01-06. Archived from the original on 2016-11-15 . Retrieved 2016-11-15. a b There is only a single non-SuperSpeed differential pair in the cable. This pin is not connected in the plug/cable. Analog signals use the USB2.0 differential pairs (Dp and Dn for Right and Left) and the two side-band use pairs for Mic and GND. The presence of the audio accessory is signaled through the configuration channel and V CONN.