Massca Pocket Hole Jig Kit M1 - Adjustable & Easy to Use Pocket Screw Jig - Heavy Duty Drill Jig for Angled Holes with Drill Bit, Pocket Self Tapping Screws &Driver Bit,

Product Information

There are three faces on most pieces of wood: the end grain, the edge grain, and the face grain. Jigs are almost never meant to be used on the end grain, so you will need a more specialized tool for it. We developed the versatile Massca Dowel Jig X to help you join two pieces of wood together in a new and sturdier way. Join together two piece of wood at an angle to create a superior dowel joint. Our jig gives you more control over every piece of wood, so you can feel proud of your finished efforts and have your project last a lifetime. Some brands have their own names for particular hole types and angles. These usually translate directly into a certain setting, so it doesn’t take long to work out what they mean. Did You Know?

An additional feature that you should prefer is a dust collection port that collects all the wood dust and it can be easily disposed, without making a mess. Portability

Heavy-Duty Aluminum Construction – The Massca Revealer door trim and window trim tool is made with lightweight, high-quality aluminum that’s stronger and more resilient than plastic, so you can use it on all your personal or professional jobs. While the Kreg R3 is designed and proportioned similarly to the Massca Twin, MulWark, and WorkPro jigs we tested, several reasons made it stand out as our preferred choice for beginners. Though the R3 was a bit more expensive than the others, it was faster to set up, easier to adjust, and made cleaner holes than the others. Measure Distances, Mark Cuts, and Ensure Superior Trim Accuracy with a Multipurpose Massca Revealer Trim Tool

Anna Ryan is a writer, copywriter and editor. She has a wide range of knowledge and, because of this, has been able to contribute to a variety of different genres, including article and blog writing. In pursuit of Viking Arm’s desire to innovate and service professionals with day to day projects, we introduce The Viking Arm® Cabinet Installation Kit (CIK), the latest addition to the Viking Arm Tool Arsenal. The integrated thumb-screw C-clamp system was easy to align on the ends and edges of boards. Because of the small diameter of the clamp’s pressure plate, we used a 1-inch-square scrap of ¼-inch plywood between the clamp and the work piece to protect the wood surface from indentations.

Buying Guide: Pocket Hole Jig

There are two versions to choose from—metric, and imperial—so make sure you get the one that’s best for your needs. One customer confirmed, “This jig is so much easier to use! Just slide the workpiece into the jig and squeeze the trigger to tighten it. The trigger clamp holds the piece plenty secure enough for drilling.” This set comes with 200 total self-tapping screws in 6 varieties. With this set you get (35) 1-1/4” fine-thread screws and (40) 1”, (40) 1-1/4", (30) 1-1/2”, (30) 2”, and (25) 2-1/2” coarse-thread screws.

It doesn’t usually matter whether or not a jig is cheap since the biggest difference is in the quality of the materials used. For example, a Kreg jig will handle wood in the same way that a discount option will: the only difference is that Kreg products have more features and better materials, as well as the fact that Kreg is more likely to offer support if something goes wrong. Unlike the basic jig set from Massca, this kit came well organized in a plastic carry case. The case felt a little flimsy, but we liked the ability to keep all of the associated tools and accessories together for storage. Also, the assortment of starter screws included both fine and coarse thread types in five different lengths for hardwood or softwood projects. As an editor, she has polished and perfected an array of pieces for diverse readerships and audiences. Read More » from scuffs, scratches and abrasions with its non - slip, non - abrasive and soft - to - touch lifting surface .

MASSCA POCKET HOLE JIG MOUNTING SYSTEM

Jigs without integrated clamp systems require some sort of clamp to fit securely to the workpiece. Some kits include either a C-clamp or face clamp, but often these are sold separately.

When Daniel moved cross country, he wanted to create pieces of furniture for his new home. From there he started looking for ways to join wood pieces together without using nails or screws to give it more of a natural feel. After searching for which joint would be best for his projects, he discovered that dowel joints would be a strong and sturdy method for joinery. However, he ran across one issue - with the dowels being parallel to one another, they had to be glued, clamped and then waited on until the glue dried before he could continue working on the rest of his piece. They also we're not as strong as he hoped. Extra Carpentry Accessories– We’ve added a hex key, stop collar, set of screws, and drill bit to help set the right depth and easily get started creating your DIY wood projects! When you’re considering products that would make tasks more convenient, portability is one of the most important aspects that you should consider. The product that you select should be compact and lightweight, making it more portable. A portable product would be easy to carry around and use, whenever you need to. Durability It also comes with a ⅜-inch square drive screwdriver, and a stop collar. When set to its default position, the integrated clamp secures workpieces at a vertical drilling height. The drill guide can be detached from the workbench, and a portable base can be set up so that the jig can be used for tasks in remote locations if you’re away from the workshop. Whenever wider spacing was needed, we drilled a single hole per location and repositioned as needed. The embedded magnet worked well with plain steel clamps, at least to avoid dropping the jig on the floor, but some manual repositioning was usually required to set up at the next position.

Jeremy Cooper - The Revealer

Multi-function Ruler and Finish Carpentry Tool – These trim carpentry tools are specifically designed to support all the measuring and marking requirements for installing window or door trim, marking jambs, setting moldings, and other finish carpentry efforts. Daniel's interest in woodworking began at an early age. His late father was a taleneted woodworker who created beautiful furniture pieces from the wood he cut on his own property. Daniel always enjoyed watching him work in the shop. That's when Daniel's idea of the Dowel Jig X came about. By creating an angled type dowel joint that would be stronger and more efficent to work with. It would allo a user to put two dowels in at different angles, preventing the parts from seperating.