You can assign specific incoming lines to ring to your handset. Your handset will only ring for the incoming lines assigned, not all lines.

Enter your new passcode followed by the Pound (#) sign and confirm it once again followed by the Pound (#) sign. The Yealink W60B DECT Base works seamlessly with the entire Yealink DECT handset range and repeater. Enhanced Call Park is used to park and retrieve calls between users within the same organization using the line keys on your desk phone. To disable call forwarding, select the forwarding service to disable, then switch the service to Off. The feature keys are the ones that you will use most often. They include the following: Talk Button – Press the Talk button to place a call after dialing a phone number or when answering incoming calls.

When receiving an incoming call, press (do not hold) the Park key to park the call on one of the shared lines. When prompted, dial the extension number against which the call was parked, followed by the Pound (#) key.

Note: When configuring No answer forwarding, you must select the number of seconds the caller will hear before the call is forwarded.

PM)complex1 Wrote: [ -> ] (03-07-2018 04:06 PM)Tom831 Wrote: [ -> ] (03-07-2018 04:00 PM)complex1 Wrote: [ -> ] (03-07-2018 03:33 PM)Tom831 Wrote: [ -> ] (03-07-2018 03:21 PM)complex1 Wrote: [ -> ]Hi Tom, For the second year till, and including, the fifth year from the End of Life, Yealink will attempt to provide SW bug fixes. In the EOL support phase, a SW upgrade of the product to a newer existing release will also be seen as a fix to the SW bug. Providing a fix may not be possible in some cases due to the limitation of hardware or software architecture, and Yealink in its sole discretion will determine what fixes, if any, will be provided.