Joined in 2023 
82 
63 About this deal
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, Noctua’s industrialPPC (Protected Performance Cooling) line comprises ruggedized high-speed versions of the company’s award-winning retail models. There were two clear winners here, the Nidec Gentle Typhoon PWM and the Medium speed San Ace “Silent” PWM fans. It is too bad that these fans are among the hardest to get.
The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid. The Deepcool GF120 was a fine runner-up. Notice how much quieter the two winners were than their neighbors. They also pushed a lot more air through the restrictive rad than fans of similar unobstructed output. What made the Deepcool fan a runner-up and not one of the winners was the fact that it was a lot noisier than they were. All sorts of products from heatsinks to fans are made by Deepcool. Their GF120 fans have special airflow channels. We can only speculate what they might do for unrestricted airflow, but as you will see below these fans are surprisingly good at pushing air through a rad.
Top Quiet Fans
FDB = Fluid Dynamic Bearing, a patented evolution of the sleeve bearing which causes the lubricating fluid to be recirculated within the bearing.
The ambient noise for the current testing was 30 dBA. To measure noise levels that were softer than that, the sound pressure level was measured 10 cm from each fan. The sound pressure level was adjusted to 1 meter by subtracting 20 dB. The sound pressure meter was a Tenma 72-942. This fan tester has a microphone that is not accurate under 30 dBA. That means an adjusted measurement of 10 – 15 dBA is not accurate; the fan could easily be quieter than that. But this is the limit of all but the most expensive SPL meters. Test Stand The PWM fan we are examining came from Tao Bao in China. The model number is D1225C12B6ZPA44, with a nominal speed of 2150 RPM. The Gentle Typhoon is known for several things. One is the low amount of airflow compared to its high RPM. Another is that the fan is very quiet for the air it moves. It is also known for its high static pressure. We will see how this all turns out. Nidec Gentle Typhoon Noctua PWM fans can be used with PWM splitters, where they all get their power directly from the PSU while tghey get speed control from the motherboard.The first picture shows you an NF-F12. This fan has relatively high static pressure compared to its nominal output. It should. It was invented to be a radiator fan. But then it entered a new life. It became an industrial fan, the NF-F12 industrialPPC. Noctua tells us:
PWM fans are used for lots of things now. A PWM fan can be used as a case fan, as a heatsink fan, or as a rad fan. AIO coolers simply expand the playing field for PWM fans. So I have collected twenty-four fans here for review in our 2016 case fan roundup.All the outputs all turned out to be underestimates, to one degree or another. The SPL varied. In some instances the fan made fewer dBA than specified. The next column shows the nominal fan speed in RPM. The next to the last column tells you how much noise the fan makes, the Sound Pressure Level at 1 meter, stated in decibels with an A weighting (dBA) which is reasonably close to what you might hear. And finally, the last column shows the airflow the fan produces, stated in cubic feet per minute, or CFM.
On the other hand, Cooler Master has brought out the Jet Flo fans, in 120 mm and 140 mm. They have a POM bearing, where a combination of oil and plastic lubricate this fan. Given that the POM, which is like Teflon, forms the mainstay of this bearing, it seems safe to use this on your rads. Jet Flo fans come with red, white, blue, or no LEDs. The six examples here were provided by Cooler Master. Noctua is a partnership between Rascom, an Austrian company, and Kolink International, a Taiwanese corporation. Noctua products are legendary, with heatsinks for enthusiasts and industry, and fans with diameters of 40 mm up through 140 mm, also for enthusiasts and industry. In this review, we are looking at a number of fans, two with Low Noise Adapters, which bring our total number of fan sets to 26. The SWiF2 120: Coolink produced a fan with a unique impeller. It has a bullet hub and eleven blades. It came with vibration isolators as well, in electric green. The specimen here was bought at retail. Coolink 120P CorsairAn older fan among the Noctua lineup is the NF-P12 PWM. It was designed to have higher static pressure than the S12 line. It provides a middle ground between the higher static pressure of the NF-F12 and the airflow-focused NF-S12A.
Great Deal 
New Comment