Joined in 2023 
82 
63 About this deal
WARNING: Do not use the blade guard as a ‘lifting point’. The power cord must be removed from the power supply before attempting to move the machine. If the mitre saw is fitted with a laser it shall not be replaced with a different type. If the laser fails to operate it shall be repaired or replaced by the manufacturer or his authorised agent. The saw blade shall only be replaced as detailed in this Instruction Manual. The saw is also workbench mountable and supplied with rubber suction feet which help to keep it firmly in place on work surfaces. Space-Saving and Portable: If you’re constrained by space or need to work on-the-go, the FURY6’s compact design and rubber suction feet are a boon. Set up a workstation on any flat surface. It was used for general DIY for a few years then was the workhorse saw for a big redevelopment at a business unit I had, now it has the house extension, garage, all the fences, skirtings, architraves, concrete formwork, every piece of wood I have put in for the last 14 years has probably been cut on that saw, when I go on tour to parents or brothers to do projects, it comes with me. So a good saw, paid for itself 100 times over.
Utilising patented professional RAGE® technology; easily cuts Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade! Features a hi-torque gearbox, which reduces motor stresses, improving performance and durability. Ensure that the Cutting Head is tilted to the 45˚ position, against its stop, with the Bevel Pointer indicating 45˚ Bevel Angle.
Reviews & Projects
All Evolution single circular blade saws and magnetic drills are covered with 3 year warranty. All other Evolution power tools are covered with 2 year warranty. A Dust Bag (not supplied) can be fitted to the extraction port at the rear of the machine. (Fig. 3a & 3b) FURY6 210mm – TCT Multipurpose Table / Mitre Saw Cuts Steel, Aluminium & Wood With One Saw & One Blade! Re-connect the Retractable Blade Guard Operating Lever to its service position using the pivot screw. With a new blade I found it cleanly cut pine and MDF good enough to get perfect mitred joints etc. As @Onoff said it would not exactly be cabinet makers spec but its not far off it with care and good setup.
Do Not use saw blades that are damaged or deformed as they could shatter and cause serious injury to the operator or bystanders. Guard by hand so that the Face Plate rests alongside the blade and underneath the Blade Guard. (Fig.21) Utilising patented professional RAGE® technology; easily cuts Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade! Features a hi-torque gearbox, which reduces motor stresses, improving performance and durability.Advanced performance; out performs normal saws. When cutting Steel (only in Mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks.Table Saw - Sturdy rip fence allows for fast, accurate straight cuts to be made on wood materials. Do not cut metal or metallic materials when the machine is configured as a Table Saw. Mitre Saw mode - Mitre stops (left & right) at 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°& 45°. Fury6 Features If the table insert becomes damaged or worn it must be replaced with an identical one available from the manufacturerNote: The Cutting Head cannot be lowered until the Cutting Head Release Lever is operated. (Fig. 11b) The Blade will remain covered by the retractable guard until the Cutting Head is released. Operation of the Retractable Guard is automatic. Always ensure that you have selected the correct saw blade for the material being cut. Do Not use this mitre saw to cut materials other than those specified in this Instruction Manual. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for This sturdy buy from Draper is a good mid-level mitre saw that will last, and make light work of cutting timber, even if it does require a bit more elbow grease than an electric mitre saw.
Respiratory protection is also advised as some wood and wood type products especially MDF (Medium Density Fibreboard) can produce dust that can be hazardous to your health. g) If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used . Use of dust collection can taking account of all parts of the operating cycle, such as the times the tool is switched off, when it is running idle, in addition WARNING: The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. The need to identify safety measures and to protect the operator are based on an estimation of exposure in the actual conditions of useIf your Evolution power tool requires attention from our engineers, we aim to have it collected & repaired within 7-10 working days. Safe & User-Friendly: The FURY6 emphasizes safety, with dedicated on/off switches for both its modes. Its simple design ensures switching between functions is a breeze, reducing downtime. WARNING: If any parts are missing, do not operate your machine until the missing parts are replaced. Failure to follow this rule could result in serious personal injury. regelmässig benutzen, müssen den Zustand ihrer Hände und Finger sorgfältig im Auge behalten. Sollte eines dieser Symptome auftreten, muss sofort ärztlicher Rat eingeholt werden.
Great Deal 
New Comment