Using a soft broom, or hand brush for smaller areas, work Sika FastFix All Weather into the joints. Make sure each joint is completely filled. If the freshly laid product is flooded, for instance due to rain, the setting period might be extended. Using a suitable pointing trowel make sure the freshly applied Sika FastFix All Weather is thoroughly compacted within the joints. The process should also smoothen/flatten the surface to the desired level. The step of thorough compaction is essential. Reserve enough stain of the same batch for one uniform surface to avoid possible colour differences.

Rawlins Paints have specialist products to ensure proper preparation and cleaning of your patio, restoring stones and slabs to their former glories, and allowing further application of sealers, paints, and stains. Existing painted surfaces – Surfaces should be cleaned, degreased, and sanded to ensure an adequate “key” is produced. Remove all loose and flaking material and treat bare areas as a new surface. Step 2: Pour the solution over the area you want to clean, and try to avoid pouring it over any plants and flowersSo, if you want to have a big clean of your garden, removing moss and weeds from outside areas as well as algae and mould, this patio cleaner should reduce the total cost and effort of the job. As a fairly universal cleaner, you’ll likely only need this one product to complete all the aforementioned jobs. The key thing is to follow the instructions, as different cleaners will work in different ways. Some work better if applied to a wet or dry surface, and may need rinsing off a few hours after application. Others use a ‘wet and forget’ approach, where you just apply the cleaner then leave it on to do its work. Are there different types of patio cleaner for different problems? Work in small sections (4 x 6 ft. or so), starting near the house and working outward. Plan the application so you don’t box yourself into a corner.

Type of dirt: There are three main types of dirt that need ousting; algae, moss, and dirt. For dirt or oil, consider a more powerful patio cleaner solution. Moss can be removed using a moss killer, whilst algae requires an algae remover. Most patio cleaner solutions will identify what they're best for cleaning, but for those more embedded areas of lichen and dirt, you'll likely need to use extra elbow grease.The product is translucent and therefore unsuitable to change colour of previously industrially dyed paving stone or slab. Stones or slabs of different age might turn out differently in terms of colour. Impurities like motor oil, crystallization of salts or other impurities have an effect on the final colour. FAQ’s My patio slabs are sealed…can I paint over them? If the stain is proving impossible to shift, consider replacing the contaminated area of paving. For cleaning oil from plain, trowelled concrete: We are passionate about paint and we know good quality patio paint when we see it. Paint is our business and directing you to the correct paint for the job is key. Thats why we have the reputation we do when it comes to not only patio paint but industrial, domestic and anything in between. Plenty of patio companies recommend our products for sealing and treating the surfaces they lay for their customers. Patio Slab Paint The easiest way to clean concrete depends on how dirty your patio has become. For speed and ease, a pressure washer is your best friend, but they are expensive and bulky to store. They can also cause damage to pavers and joints if used to aggressively.