Gluing of natural stones even if they are instable in presence of moisture or that get spoiled easily.

The joints will be done after 24 hours. Use the adequate mortar from the MORCEMCOLOR line, according to the type of joint. This beautiful & private contemporary detached Garden Lodge is on our family farm and provides great quality spacious family accommodation, all set behind electric gates in Oakley Green, Windsor. It's perfect for up to 2 adults and 3 children (maximum) and has been lovingly furnished & recently refurbished to make it a fantastic place to stay. There is high-speed WI-FI and secure private parking. It has a large patio and huge lawned area together with outside seating, a BBQ and various sports and toys available to play with. These guidelines and standards aim to keep the content on Booking.com relevant and family-friendly without limiting expression of strong opinions. They are also applicable regardless of the sentiment of the comment.Gluing of ceramic tiles, pool mosaics even on water proof surfaces treated with Morcem Dry products. On floorings with underfloor heating, apply when substrate is at room temperature (between 5ºC and 30ºC).

Tiled areas of walls and floors above 50 m² indoor and 30 m² outdoor or elongated more than 15 linear m it is recommended to divide them with joints filled with a deformable grout (PUMALASTIC-PU). Do not use this product under any other circumstances that have not been described on this data sheet. Gluing of ceramic, porcelain stoneware and big size fine slabs with or without reinforcement in exterior façades. It is highly advisable to leave a free joint of expansion between the pavement and the wall or pillar, hidden by a skirting board of approximately 5 mm. These joints should be refilled with a deformable material from PUMALASTIC. Place the tiles on top of the fresh adhesive and press to make sure they touch the adhesive area before it exceeds its opening time, 50 minutes.The working time of the product, in normal temperature and humidity conditions, is about 1 hour- High temperatures reduce it and lower temperatures increase it. Observe construction joints (expansion, contraction, fraction, perimeter corner joints) and the joints between the cement slabs(minimum of 2 mm inside and 5 mm outside). In case of waterproofing and placement, apply with a flat trowel a layer of at least 1 mm of product in the area to be waterproofed and once dry (after approximately 24 hours) apply the product with the corresponding notched trowel for the placement of the ceramic material. In radiant heating floors, apply the product when the substrate reaches room temperature (between 5ºC and 30ºC), the heater should be off at least 48 hours earlier, and it should be switched on gradually, minimum after 7 days, once the job is over. GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.