Drayton DIGISTAT +3 22083 7 Day PROGRAMMABLE Room Thermostat

Product Information

The thermostat is designed to be versatile and compatible with a wide range of heating systems, including combi boilers, system boilers, and electric heating systems. It can be used as a wired or wireless thermostat, depending on the user's preference and the specific installation requirements. There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat? The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process:

When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor.

The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event.

This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The thermostat also features a "holiday mode" that allows users to set a lower temperature while they are away, further improving energy efficiency. Reset the Receiver by pressing the button for about 15 seconds until you see a red light followed by flashing orange/green which shows it is in pairing mode.

With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple! The Green Premium eco-mark stands for complete, transparent, and easily available information about products