Fireangel CO-9B Carbon Monoxide Alarm, Kitemark Approved, 7 Year Life, White, 1 pack

Product Information

Night sensing lowers the brightness of alarm’s heartbeat sensor and automatically activates ‘sleep easy’ mode, allowing residents to silence low battery chirps for 8 hours, up to 10 times. Landlords must also repair or replace alarms when notified of a fault, but regular alarm testing will remain the responsibility of the resident. The smoke and CO alarms must comply with BS EN 14604 (Smoke) and EN 50291‑1 (CO) and carry a British or European approval mark, such as a Kitemark. Known as the ‘ Silent Killer’, CO occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak. Find out more about the FA3313X4 CO Alarm. FA6813-EU: Carbon Monoxide Alarm with replaceable batteries

An audible Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. The alarm features the latest CO sensing technology and can be used to replace end-of-life FireAngel CO-9X alarms. Fitted with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensors within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time.Carbon monoxide is a highly poisonous gas, caused by fuel not burning properly. It cannot be seen, smelt or tasted by the human senses and is only detectable through a CO alarm.

CE marked and Kitemarked to BS EN 50291-1 (domestic use) & BS EN 50291-2:2010 (camping/caravans/boats) Carbon Monoxide (CO) alarms: A Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. Known as the ‘Silent Killer’, carbon monoxide (CO) occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak. FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel-burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Heat Alarms (Kitchen Alarms): Heat alarms are the only alarm suitable for use within the kitchen as they’re not affected by cooking fumes like traditional smoke alarms. Over 60 Percent of fires start in the kitchen, with cooking and faulty white goods (fridges and tumble driers) being the main causes. FireAngel recommend a heat alarm is fitted in the kitchen, but you can also fit additional heat alarms in the garage and loft to protect these areas.attaching the base plate. After 1 minute, press the test button to hear the alarm sound. Please note, the alarm will not sound before the 1 minute activation period is complete.

With a multi-functional LCD digital display and array of exclusive features such as Alarm Memory, Ventilate Instruction and Environmental Sensing, the FA3322-EUX10 offers the highest level of CO detection for a property. Tenants can experience both audible and visual safety warnings with the digital screen, which displays temperature reading in standby mode and highlights dangerous temperature and humidity conditions to encourage intervention. The display also changes colour to indicate various warnings to residents for clear safety advice. Battery powered carbon monoxide alarms can typically be installed wall-mounted or left free-standing on flat, level surface.If your CO alarm is beeping once, twice or three times regularly, you may need to replace your alarm batteries, or you could be experiencing exposure to low levels of CO. The guide below will help to identify the cause of beeping. Perfect as a free-standing unit or can be easily mounted to a wall or ceiling. It is also completely portable so can keep you safe no matter where you stay. Looking for a CO-9D alarm replacement? FireAngel’s new FA3322X4 alarm will be replacing any end-of-life CO-9D alarms. To activate a new CO alarm, pull the disabling tab out of the device and wait up to 1 minute for the green LED to flash to confirm the alarm is active. For the FA3328 only; activate the device by