Joined in 2023 
82 
63 About this deal
Blind time: Select a blind time in minutes (from 1 to 10) after last detected motion. Select a blind time from the dropdown menu. IMPORTANT: If the Device has not been added into your Wi-Fi network in 3 minutes, it will switch off. Press briefly the Reset button to start it again. Pressing the Reset button while the Device is in AP mode will turn off the Device. 3. Inclusion to Shelly Cloud Not everything is by the book. While the temperature in the device card is updated every couple of minutes, the graph in the app displays the average temperature at hourly intervals. It’s frequent enough to give you a general idea about the environment in your house, but not frequent enough to perform an efficient analysis of your heating system. But neither the battery nor the new design is the most impressive new thing here. At least for me the most impressive new feature in Shelly Motion 2 is the embedded temperature sensor that immediately provides more opportunities for home automations. So, if you buy the Shelly Motion 2 Sensor you actually getting 4 useful sensors. Which are:
Home Assistant will display a repair issue for the Shelly device if push updates from this device do not reach the Home Assistant server.
Welcome
Unfortunately, there is no log of the past motion triggers so if you want to keep a record of this, you will have to use associated webhooks or MQTT to store it yourself. As a temperature sensor To control the sensitivity of the sensor you have a slider with 255 levels of sensitivity – you will definitely set it to activate on important events. As I don’t have pets, I can’t really verify how reliable this would be with having/not having pets trigger the sensor.
The Shelly Mobile Application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used stand-alone or with various other home automation platforms and protocols.Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. What I really like about Shelly Motion2 is the fact that it comes with Shelly Cloud and a web interface. It means you get to choose how you take advantage of the sensor. In the typical scenario, where the sensor is connected to Shelly Cloud, you can interact with it via the app, connect it to Alexa and Google Home via relevant skills and use it as a trigger for motion, temperature range, vibration and light. Set the motion detection threshold (from 1 to 256) using the slider. A lower value sets higher sensitivity. See motion detection percentage above of the slider as you move it.
Shelly® devices can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet.If Channel Name is set in the device, the integration will use it to generate the entities’ name, e.g. Kitchen Light What’s really cool about this sensor is the custom options. Shelly Motion can detect individual motions every 3 seconds. Obviously, this more than anyone would ever need, so you can customise the following settings: ATTENTION! Before beginning the installation, please read carefully and entirely this guide and any other documents accompanying the device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide. Introduction to Shelly®
Input the number of consecutive movements (from 1 to 4) for the sensor to detect before reporting motion. The integration uses Device Name to name its entities if the device has only one relay or no relays at all. In my next article, I will show you how to use Shelly with NodeRED via REST and MQTT protocols so you can come up with nice home automation projects yourself without being dependent on Shelly Cloud. I also got 2 Shelly Duo bulbs to play with, expect more Shelly-themed articles soon! Missing one thing Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging.It’s pretty sensitive at low settings, and I could imagine this can be activated by passing lorries outside if your walls are prone to movement like this. With a bit of trial and error, you could use this to create an earthquake alarm, in case you sleep as deep as me. Shelly app Using the homeassistant.update_entity service for an entity belonging to a battery-powered device is not possible because most of the time these devices are sleeping (are offline). If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events The integration uses the following strategy to name its entities if the device has more than one relay:
Great Deal 
New Comment