Smok Vape Pen 22 Mesh Coils - 0.15 Ohm [Pack of 5] Works with Vape Pen 22 Kit, Vape Pen V2 Kit, Vape Pen Tank No Nicotine

Product Information

Then when getting into the RPM Pod, here we will find more options, but the best in delivering both flavour and cloud production, is the RPM 0.4 ohm Mesh Coils , which is also included in all the devices box. If you tried it and wanted to see all options, then you should go for the Triple 0.6 ohm Coils .

We hope here at UK ECIG STORE that this blog has been helpful, and that the tips are satisfying. Outro DTL, MTL, and RDL vaping styles require different coils. You can roughly split this up as being either sub-ohm or 1-ohm and above. DTL vaping uses coils of around 0.6-ohms and below, while RDL is in the 0.5 – 0.8-ohm range. MTL, on the other hand, uses 0.8-ohm or above.A1 Single Mesh coil has a resistance of 0.17ohm and performs best, between 90-140 watts. The A1 has a faster heating process which increases flavour production. The Smok K coil range, features quad (4) or octo (8) coil builds in 0.15 Ohm and 0.2 Ohm resistances. All these devices, RPM 40 , Fetch Mini and Nord 2 pod kit, run on the same compatible coils, which are the Nord coils (for the original Smok Nord), and the newly implemented by Smok, the RPM Coils. Please see all coils available for those devices below: The options as you can see are plenty, but there is only one coil that stands out, and is the TFV8 V8 Baby Mesh Coils - 0.15 ohm . The flavour and cloud production are at the peak for this and compatible tanks, when using this coil due to the Mesh coil feature that other coils form the range do not have.

All coils available are compatible with Sub-Ohm vaping. The main 2 coils I would like to mention are the Mini V2 A1 Mesh Coils , which is probably the most reliable if you like to vape at higher wattages (40-100W), and are best used between 60 to 80W. Otherwise, if you prefer more of a standard 40W vaping power, I would recommend the V2 S1 Mesh Coils , which are best used between 50 to 70W. These are the replacement coils for the: SMOK R-Kiss kit, Smok X-Priv kit. Smok Species 230W or Smok Mag Grip kit etc. SMOK Mini V2 S2 Coil Specification The final thing to consider when choosing the right coil is what type of nicotine you’d like to vape. Do you want a coil that can handle Nic Salts? What about the VG/PG ratio? Now that you understand the various factors that influence which type of atomizer to use let’s look at a few different SMOK coils.In short, DTL vaping uses lower resistance coils to produce more vapour. The coils allow more current to be run through the atomizer, creating more heat and, as a result, more vapour. Restricted Direct-to-Lung: A3 Triple Mesh coil has a resistance of 0.15ohm and performs best, between 100-120 watts. The triple mesh build allows for increased airflow giving a denser vapour production. The majority of e-liquids are made from Propylene Glycol. This substance carries the nicotine and flavourings in your juice. PG is thinner than VG, and MTL coils are made to work with these liquids. If you use PG is sub-ohm coils, your tank is more likely to leak.

If instead you prefer to use the RPM coil here is the s mok rpm coils review, I would either recommend the Smok RPM MTL DC 0.8 ohm or the RPM Quartz 1.2 Ohm Coils . The main difference stands in the cloud production which is superior in the 0.8 MTL and the throat hit superior on the RPM Quartz 1.2 Ohm Coils . The Smok S coil range focuses on lower wattage devices with resistances of 0.15 Ohm in either a single mesh coil build or a quadruple coil. The SMOK Vape Pen V2, builds upon the extremely popular Vape Pen 22 AIO device. This new and upgraded device features a 1600mAh battery and now offers up to 60W power output. Operating of a mechanical mode, the wattage output is delivered based on remaining battery capacity. A sub-ohm device, the Vape Pen V2 utilises a 0.15ohm meshed coil and a 0.6ohm dual coil both for use with high VG e-liquids. The SMOK Vape Pen V2 is also compatible with the original SMOK vape pen coils.S2 Quadruple coil has a resistance of 0.15ohm and performs best, between 30-70 watts which provides a denser cloud production with increased flavour. K1 Quadruple coil has a resistance of 0.2ohm and performs best, between 80-130 watts. This coil has balanced heating, which produces denser clouds with increased flavour. S1 Single Mesh coil has a resistance of 0.15ohm and performs best, between 40-80 watts. This coil is designed for intense cloud production with increased flavour. RDL is slowly becoming a more popular vaping style. It’s like DTL, but it reduces the amount of air that you mix in with your vape. The Smok Mini V2 Coils have been designed for use with the Smok TFV-Mini V2 Tank. Designed for sub ohm vaping there's a variety of versions of this Smok replacement coil. Due to the sub ohm resistances, we recommend using high VG eliquids of 60% and above for best performance.