Clear water Hot Tub, Pool and Spa Test Strips x 50-3 in 1 - Measures Chlorine, PH and Total Alkalinit (Pack of 1 (50 Strips))

Product Information

Need it in a hurry? We are also able to offer before 12 noon and Saturday delivery services. See here for information on these services Having the correct pH levels will ensure your eyes and skin aren’t irritated by your pool water. Most people think it’s the chlorine that causes your eyes to turn red after swimming, but it’s actually the pH level. The ideal levels are between 7.2 and 7.6. Rainwater can significantly affect your pH level, so test your water if you’ve experienced heavy storms. If you need to raise or lower the level, choose the appropriate chemical to add to the water. Calcium Hardness Dissolve the quantity of Chlorine Granules in a jug of warm water and pour into your hot tub. Activate the AirJets for a few minutes to circulate the chemicals evenly throughout the water.

Never use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products. For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water. Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ.

Strip Dip

Remove cover from pool to allow evaporation of the chemical (keep the pool filter running constantly). ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function.

Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it.The hot tub test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level. Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user. pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation. Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris. Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur.

The 5 Inch Chemical Floater slowly releases Clearwater Mini Multifunctional Tablets or Chlorine Tablets, making it the perfect accessory for busy spa users who want a hassle-free way of maintaining clear and healthy spa water. The dispenser has an adjustable dial which controls the release of the 20g tablets, ensuring that the sanitizer level of your spa water is consistently and efficiently maintained. Compatible with all spa models. Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. Chlorine levels inside an above-ground pool should be 1 ‑ 3 ppm (3 ‑ 5 ppm for hot tubs), pH levels should be 7.2 ‑ 7.6 and Total Alkalinity levels should measure 80 ‑ 120 ppm. Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water.The hot tub and pool test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level.