SlipDoctors Non Slip Floor Coating for Laminate, Vinyl, Lino & Wood Floors – Floor Grip by SlipDoctors – Highly Durable Slip Resistant Sealer – Gloss Finish Treatment

Product Information

This anti-slip tape feels more like rubber, which makes it appealing to the touch while giving exceptional levels of grip, plus we slightly alter the embossing pattern of the upper surface. Anti-slip cleats Anti-slip cleats are gritted, durable and provide a visual warning for surfaces. Our Setonwalk Anti-Slip Cleats are high traction and can be easily applied in both indoor and outdoor environments. We also offer long-lasting Mop-Friendly Anti-Slip Cleats for areas that experience high traffic and are often cleaned. For industrial vehicles, equipment and zones, we offer the Heavy-Duty Coarse Anti-Slip Surfacing Cleats, which are made to withstand the extreme pressures of heavy-duty manufacturing environments. Slips and trips in the workplace The HSE has a number of guidelines on the responsibilities of employers to maintain flooring safety in the workplace. According to the Health and Safety at Work etc. Act 1974, it is your responsibility as an employer to ensure the safety of employees and visitors to the workplace, and this includes ensuring that the flooring is safe and that slip-prone areas are well-marked. Not only does GripX increase the slip resistance of the surface but at the same time will seal the tile or stone surface to prevent water damage, scuff marks and scratches. The textured grit finish is completely barefoot and paw-friendly making it perfect for slippery bathrooms, showers, kitchens or smaller kitchens, patios and balconies. Increased Choice: Graepels metal flooring is available in more than twenty types. Many types are also available in safety steps and ladders rungs. A range of materials are also available including steel, galvanised steel, stainless steel and aluminium.

Step 1: TEST SAMPLE: Floor Grip should be tested on flooring surfaces before full application. To prepare test sample, pour a small amount of Floor Grip into a separate container with a small amount of additive, mix well, do not shake. Apply to a clean inconspicuous area of your floor and allow to dry completely. The floor press can be used to increase muscle mass in the triceps and chest, and can be a great way to overload the triceps specifically. To build muscle mass in the triceps and chest you can train a variety of rep ranges. For best results, add variety into your training program using rep ranges of five to 10, 10 to 20, or 20 to 30 reps for a total of three to five sets. To Gain Strength Below are three floor press variations that can be used by coaches and athletes to keep training varied and progressive. Dumbbell Floor Press GripClad®’s abrasive standard tape provides excellent levels of grip and friction, and abrasive coarse tape provides industrial grade grip. Our standard anti-slip tape offers high traction and durable protection underfoot for light to medium pedestrian foot traffic for steps, stairs, and walkways.

Rhombus | Safety Flooring Types

Step 4: Add an appropriate amount of additive to the solution, depending on a number of coats, and mix well. Medium texture is recommended. Read the additive bottle label for instructions. In the below section we discuss the various strength, power, and fitness athletes who can benefit from integrating the floor press within strength and accessory training programs. Safety & Slip Resistance: Graepels metal flooring offers improved underfoot safety, in addition to a comfortable walking surface. It is an ideal choice for walkways and platforms, stairways, ladder rungs, and steps. It also offers increased slip-resistance and safety through its upward embossment. Conformable anti-slip tape adopts the profile of chequer plate and will not lift or rise off. Once it is pressed into place on uneven surfaces, conformable taperemains in that shape and resists lifting. Step 3: Once ready for full application, determine the number of coats you plan to apply. Prepare a solution for each coat separately in a sturdy container. Add the appropriate amount of Crosslinker to the container, dividing it between the containers for each coat. NOTE: Once Crosslinker is added to the FloorGrip, the solution must be applied to the floor within 4-6 hours. CAUTION! MIX WELL BEFORE APPLYING!

Now drive the weight until your elbows are fully extended. Make sure to not over protract (bring your shoulder blades forward) at the top when completing a rep, as this could throw your positioning and base out of line.

SlipDoctors GripX is a durable anti-slip coating specifically formulated to increase the slip resistance on tiles, natural, stamped, and stained concrete, sealed surfaces, and most other natural stone. GripX is an easy-to-apply roll on coating that once cured has a semi-gloss textured finish and can be used indoors or outdoors. TEST SAMPLE: Floor Grip should be tested on flooring surfaces before full application. To prepare test sample, pour a small amount of Floor Grip into a separate container with a small amount of additive, mix well. Apply to a clean inconspicuous area of your floor and allow to dry completely. If you or your athletes/clients have an injury, it is best to get it looked at before swapping exercises and hoping for the best. Our exclusive roll-on anti-slip coating is a clear, self-leveling 100% waterborne urethane sealer that helps prevent slip-and-fall accidents when properly applied. Designed for creating an anti-slip coating on natural hardwood floors, engineered hardwoods, bamboo, vinyl, vinyl composition tile VCT, LVT, linoleum, laminate, cork, epoxy, and previously sealed floors. Surfaces must be thoroughly cleaned. *Not required* For increased adhesion by sanding use a maroon pad or 320-400 grit sandpaper to lightly scuff the floor.

Step 2: Floor Grip can be applied in either 2 or 3 coats. Each coat consists of: Floor Grip + Crosslinker + Additive The floor press is a pressing movement used to increase the size, strength, and performance of the upper body, specifically the triceps and chest. Below are the primary muscles used, in the floor press movement: Pectorals (Chest)

Surfaces must be thoroughly cleaned and prepared by appropriate sanding methods. Using a maroon pad or 320-400 grit sandpaper is recommended to lightly scuff the floor. Prior to the coating application, remove all dust from floor and surrounding structures. Always protect neighbouring surfaces including carpet, metal and other surfaces. Once ready for full application, determine the number of coats you plan to apply. Prepare solution for each coat separately in a sturdy container. Add the appropriate amount of Crosslinker to the container, dividing it between the containers for each coat. NOTE: Once Crosslinker is added to the Floor Grip, solution must be applied to the floor within 4-6 hours. CAUTION: MIX WELL BEFORE APPLYING Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.