Hydra Fountain Clear Water Feature Cleaner | 250ml Treats 7,500L Highest Dilution Rates - Water Feature Treatment Keeps Water Crystal Clear from Algae, Cleans Water & Biofilm Build-up

Product Information

You can pull out these things by hand, but if there seems to be an obstruction deep inside, it might be best to use a homemade solution to clean it. This will remove any unreachable obstructions and clear the way for proper water circulation. If you’ve had a cheap plastic garden pump for a couple of years, we’d suggest upgrading to a high performance garden fountain pump like this one from Pentair. Not only are you likely to have less technical issues, but you will also guarantee higher flow performance for a much longer period of time. Change Fountain Water Once Per Month

A water fountain is a glorious addition to any garden. The subtle sound of flowing water can provide a sense of calm and tranquillity. The birds chirping as they bathe brings a deeper connection with nature. And the blossoming plants, critters and amphibians provide a self-sustaining ecosystem for a variety of nature and wildlife.

The best kind of water to use in your fountain is distilled. This works best because it’s pure water. The pump has an easier time pushing it through, so it will last longer and keep your water cleaner for a more significant amount of time. When the pump is completely covered, your brand-new water is ready to begin the circulation process. Turn it on, and after a few moments, the fountain will run just as it did before. This indicates that the pump is in the proper location. Keep the Fountain Clean by Keeping the Water Clean If your fountain doesn’t have any water plants, you can always add a small amount of chlorine to your fountain. We’d only recommend using one to two tablespoons, every two to three weeks during summer and the warmer spring weeks of the year. Ensure your pump is turned off when adding the chlorine.

Maintenance Dose: Add 25ml of Fountain Clear every week from March to September and every two weeks at other times. Regular use will prevent re-contamination. This small precautionary step goes a long way, helping prolong the life of the water pump. It’s important in the general upkeep of your centerpiece. Replace Your PumpBoth of these can be applied with a toothbrush so that you can get down to the deepest parts of the pump without issue. You can also use pipe cleaners. Refill With Distilled Water As well as unsightly algae contamination, water can contain other harmful organisms. Hydra F ountain Clear - water feature treatment will reduce microbes by 99.9% in less than 3 hours, such as: Escherichia coli, Streptococcus agalactiae, Micrococcus luteus, Staphylococcus, Pseudomonas aeruginosa and Legionella pneumophila (responsible for Legionnaires Disease). ENVIRONMENTAL FRIENDLY FOUNTAIN CLEANER When looking for the best and most cost-effective product for water feature cleaning, there is only one solution : Hydra Fountain Clear Fountain Water Cleaner. INTERNATIONAL STANDARDS Keep water crystal clear with this All-Natural water feature treatment. Safe to use around fish, birds, pets & plant life, this water clarifier is produced from natural ingredients for use in all types of water features to help keep water crystal clear and free from surface staining. You can also scrub any extra decorative items clean with a sponge, making sure that they don’t have any invasive algae or dirt that may damage your progress.

A nice clear water feature or garden fountain will start getting problems with biofilms within a couple of weeks from installation. Remember to rinse down and remove any residue left on the surface of the fountain with a garden hose and a pair of old, clean bath towels before refilling. Learn to Clean and Replace Pump Filters

Our Top Rated Products

Once the fountain is full, you should once again have a clear and glistening centerpiece. However, without proper care, the water will become dirty again. There are also some additional preventative measures you can take. Algae and Dirt Preventatives Nature's way is if there is a food source, moisture and sunlight, something will grow, as there are always trillions of spores in the atmosphere waiting for their opportunity to germinate. Water pumps often become clogged with dirt, leaves, and other natural debris that come with the outdoor location. This leads to poor water circulation, in turn causing the liquid to turn a lovely shade of brownish-green. Nobody wants their water feature to look unsightly with slime type algae, filamentous algae and single-cell algae (which cause water to look green). PUMP WATER FEATURE ISSUES Use at 1:30,000 (1 ml per 30 litres) to protect clean water from algae and green water (single-cell algae) contamination. Treat weekly-monthly depending on local conditions.