Everbuild Black Jack 901 | Solvent Based, Full Bodied Black Bitumen Paint - Protective Coating for Concrete Structures, Stone & Concrete Screeds - 5 Litre - Black

Product Information

Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. I consider this approach to painting to be similar to that of recommending PVA as a primer coat for an emulsion paint system. You may be storing up future problems. Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, downpipes, fences, railings, gates etc.

Blackjack - Bold, True Black Al Fresco Furniture Paint | Frenchic Blackjack - Bold, True Black Al Fresco Furniture Paint | Frenchic

Protecting coating on concrete etc: Due to the porous nature of concrete and some stone surfaces, an initial primer coat of Everbuild primer should be applied.

Usually cheaper than many other coatings offering similar weather proofing performance, it’s an economical option Wood is prone to expansion and contraction in a way that is not replicated in masonry, it is flexible. Manufacturers will take into account the natural characteristics of the substrate when formulating coatings for a specific purpose. This is especially true in the choice of binder and the modifications which may be made to it. It is not wise to use bituminous paints on general painted surfaces. If applied over existing paint the solvent may soften the paint beneath. If subsequently painted over with an ordinary oil paint then it will bleed through.

Everbuild Black Jack Black Bitumen Paint 5L | Toolstation

Ensure surface is in suitable condition for painting and free from grease, wax or penetrating substances. If previously painted, remove loose or flaking paint. I have looked at several makes of bitumen paint, and there are several which include wood in their list of uses, so it does seem that you can apply bitumen paint to wood in accordance with given instructions. Sure, a professional would never recommend doing such a thing - the cumulative sharp intakes of breath alone would deem against it. Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.I have just installed a plastic membrane roof and sealed the joints with heat gun . I have painted over the heat sealed joints with bitumen paint for added protection .

Bitumen paint | Screwfix Community Forum Bitumen paint | Screwfix Community Forum

Chalk and mineral paint formulated for wooden furniture. Also suitable for laminate, powder coated radiators, UPVC, ceramic wall tiles (we recommend avoiding very wet areas like shower/bath surrounds). Here is some useful information about painting tiles. Can be used for internal walls – in this case, thinning with up to 10% tap water is advised to ease application.What the difference is (if any) between these two types of bitumen paint (those that say you can use on wood, and those which leave it out) I don't know, but it would seem it depends upon the make you get whether you should apply to wood or not. Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video. Prepare the surface well by removing dust, oil, grease, old coatings and surface contaminants. A primer is not usually needed with bitumen paint but occasionally for additional protection of bare metal surfaces, prime with Zinc Rich Primer or Metal Primer. Use fast dry etching primer for non-ferrous metals. The steel will be hot dip galvanized (120 micron) and coated with epoxy paint. However, we intend providing an additional two coats of bitumen paint taken up to 50mm above ground level (tarmac path).