Georgina explained: “Some complain these wedges and clips don’t allow for the expansion of wood through the seasons though.” Neighbours new fence has left me with a 0.5ft x 2ft deep trench on my side the length of the garden What’s more important you get whittling kit guiding you to the happiness of seeing that finished product

You’re getting all the tools and supplies you need to carve not one but two beautiful comfort birds as well as a step-by-step guide. Georgina said: “For more of a DIY option, you could run a line of silicone on the inside of the post or use rolled-up newspaper to wedge in the gaps and camouflage it by painting the same colour as the fence. Nail in cable ties along the top of the fence boards and attach them. This will prevent the boards from moving against each other.Fence panel wedges are used to stabilize loose or sagging fence panels and to prevent them from rattling when the wind blows. This can be achieved by inserting a wedge on both sides of the panels to tighten them against the fence post. Fix a fence is a UK designed and manufactured innovation designed to stop fence panels rattling during windy weather conditions. Simply push or hammer wedges into any gap between the fence panel and concrete post ensuring there's no room for rattling. BeaverCraft Comfort Bird Wood Carving Kit - Whittling Starter Kit, Inc Knife, Basswood, Pattern, Strop, Compound, Tape Adding wood shims to your wooden fence is a great way to stop fence panels from rattling. Wood shims are available in both hardwood and softwood versions. The wedges are inserted into the gap between the fence post and panel, then gently tapped into place with a hammer. How to Install Them

DIY expert Georgina explained: “Fence rattling is a common complaint, but it does indicate the wind is able to pass through.UPDATE - Thanks for the advice guys! I also sought some legal consultation and they agreed that the fence currently dictates the... Fence panel grips are stainless steel fence accessories designed to stop annoying banging and rattling panels. Made from stainless steel s are designed for use with steel, timber, and aluminium fence panels. They are suitable for both domestic and commercial applications. It’s not a permanent fix but it works for a while and is easy to put up and take down when the weather changes. Here’s what you do: Fence panels are supposed to move (more on that later) but the issues start when they rattle against the fence posts, making for not a very nice noise… especially at night. How They Work to Stop a Fence Rattling

The above answer is the only real solution, if you have enough room the you could attatch some batten to the fence panels to act as the "wedge" but if its only a couple of mm the some doorstops style wedges is best. 2012-04-22T13:20:02+01:00 The big disadvantage of using wood is when they get hot, they will expand. If you’ve hammered them in too tight, the fence panels can (and will) break. Tie-Down Straps Channel nuts are maybe the best alternative along with panel grips. These are metal plates with a string on one side. These work great as they can be easily pushed into the gap between a panel and fence, with the spring giving the panel enough wiggle room to move with wind, and the wood expansion in the heat. Use Cable TiesIf you don’t want to make any holes in your fence panels, using a bungee cord can be a great alternative to tie-down straps. Cable ties are long, thin plastic straps that can be used to secure loose, rattling fence boards. The ties are better than nails or screws because they don’t go through the fence board and make it harder to remove.

When buying partner items like this one, your contract of sale will be with our Range Plus Partner instead of us. All of these alternatives work similar in some way to panel wedges. They all fill the gap between the panel and fence, and limit the amount of the the panel can make hitting the post. Fence Panel Grips Hi fence panels will expand and contract with The weather. The easiest way I found to stop them moving too much is to put a screw through the panel and just tighten it up so it bites on the concrete , as you would if you were fixing the panel to a wooden post (do not over tighten as the concrete post will move ) Pete. 2012-08-19T17:25:01+01:00 To reduce the chances of sagging, construct posts with concrete footings rather than just setting them in the ground. If you want your fence to be more rigid, use metal posts instead of wood posts. ConclusionTie-down straps come in many different lengths and widths. They are made of nylon webbing with a high-quality hook on one end and a loop for attaching to a fence post on the other end.