Parrot MKi9200 Hands-Free Car Kit

Product Information

Any idea what can i do to solve this? I have understood that parrot is not involved in hands free development anymore, but this is a dissaster…. If the firmware is earlier than v1.96 you will need to update to this version first and then can go to later ones: V2.11 or V2.20 are both fine Have only ever changed 2 blown fuses on any Parrot kit – they just don’t blow (except for a good reason) You may still find that your iPhone still mis-behaves as Apple have the annoying habit of using different chipsets on the same phone – just because the outside looks the same does not mean it has the same internal components. Almost certainly it will be the battery in the remote control needing to be replaced. The remote becomes unresponsive and “hit and miss” when the battery is going flat.

Parrot: Parrot MKi9200 - Bluetooth Handsfree Kit - The Bass Bin

The stereo will still mute on phone calls and you’ll still be able to play music through the Parrot. From your description I would guess you have an iPhone and this will push all alert tones via Bluetooth. Apple have never cured this “feature”, despite repeated requests. I have a MKI9200 with firmware 2.20 I can make and receive phone calls absolutely fine but as soon as i try to play a song from my phone (Android huawei p20) via Bluetooth it displays the song on the screen as if its playing but there is no sound whatsoever. I tried using the line in function also but also no sound. The mic, wiring harness and ipod/usb lead stays the same ( unless it is a MK3 control box, where the ipod connector is deleted).Would recommend that you leave it to try to complete the update for a further 10 mins. After this period you can only try the following: The MKi automatically synchronize the names and phone numbers in your mobile with their phonebooks and update theirs phonebooks each time a new entry is detected. After you enter the update process it is vital that it is not interrupted – you MUST wait for the unit to re-boot itself after the screen goes blank. If the unit does not re-boot after a minimum of 5 minutes, something has gone wrong. Unfortunately, your choices at this stage are rather limited.

Parrot MKi Car Kit downloads | Parrot Support Center

You can try disconnecting the power and re-connecting again after 10 to 15 mins but this only works very occasionally. If that works make sure that Bluetooth streaming is definitely enabled on the A70 Bluetooth settings. Also, make sure the volume is up as if it is at zero the Parrot has no audio to play. Last week my iphone7 went to be swapped due to a fault and since then the new one won’t pair with the Parrot correctly. It will say Telephone connected on the Parrot screen, on the iPhone it will look like it has paired but if I look on the Parrot it won’t show as a paired device and will only be able to be used for phone calls not media.Apple iOS users are recommended to do the following – revert to IOS 9 ( if only, as this would cure the issue – sadly Apple do not allow this…)

Parrot MKi9200 Update File V1.96 ENGLISH only - JustCarKits Parrot MKi9200 Update File V1.96 ENGLISH only - JustCarKits

The alert tones are sent by the phone and the Parrot is playing what it has been sent (as it’s supposed to do). So I did a factory reset on the Parrot and my iPhone and still the same issue exists. Tried every troubleshooting guide I can find but can’t find the answer. Any idea? I PAIRED IT WITH PARROT9200 IN MY CAR , BUT NEXT TIME I POWER ON THE CAR IT DOES NOT CONNECT AUTOMATICALLY. I have the parrot mki9200 and it will not pair with my iphone x. i tried to pair it with my old iphone 4, which worked and paired but with no audio. I recently “lined in” and iphone 6 and that worked, but when i tried again it did not. how can i get my audio to work? doesn’t have to be bluetooth necessarily i just would like to listen to music from my phone. If the updates fail to cure the issue it will be an issue with the Bluetooth chipset in your iPhone – have seen it before. Customers got around it by returning the iPhone for a different version.

Hello,i have parrot handsfree MKi9200 and the language is netherland ,version 1.90 and another version is 0.58 .I want to update or change the languageto english , please help me how to do that. Thanks a lot I’ve tried the same iphone 7 in another car with the same Parrot and is fine I can connect OK to that it asked me the code to pair and then was straight in. Have had this a couple of times with the iPhone 6S and there was no solution apart from changing the phone or replacing the MKi9200 with the Bury CC9068. I have a similar issue. On my iphone 7 (ios 13) i can force connection with my parrot mki9000, but it does not connect automatically when i start my car and every time that i use it i have to search bluettoth devices and force connection on my iphone. Parrot support advice me to forget bluetooth device, erase parrot memory, and update to v2.20 software my parrot, but the problem remains.