DCT Concealed Cabinet Door Hinge 35mm Template Jig Kit – European Hidden Hinge Boring Hole Cutter & Bit for Installation

Product Information

Darn Roman! That’s the one thing I didn’t think to measure. I was more thinking folks would be fitting the hinges to their own cabinets! Right, I will measure this next time I go to IKEA and update the article. Not in the next few days though unfortunately for you. The hinge position is adjustable though as there are rows of fixing holes as you know. If you have the cabinets you can just measure down from the outside top I guess. To find out how to both accurately measure and fit concealed cabinet door hinges, read on below. Parts of a Concealed Cabinet Hinge If you’re using the IKEA Ultrusta cabinet hinge from the new Sektion system, here are a few measurements you’ll need to fashion your template. Drill the hole in the door with a 35mm hinge cutter for your drill or router. Use the tables below to work out how many hinges you will need to install to the cabinet door you are fitting to ensure it opens and closes correctly and more importantly doesn’t sag.

IKEA Sektion Ultrusta Cabinet Hinge: Making a Template IKEA Sektion Ultrusta Cabinet Hinge: Making a Template

A router bit is required with full-size door hinge jigs, and one is often included. Shank size will be either ¼ inch or ½ inch. Neither is better than the other, but the size will determine the kind of router used. Some ½-inch routers include a ¼-inch collet as an option, whereas ¼-inch routers cannot use ½-inch bits.

If your using a hand held drill then I'd make a jig, drill a hole in a scrap of MDF and put a stop on it so that you can just hold the jig to the door and drill through the existing hole. Does anyone know where I can find a paper template for marking the hole locations for a Blum concealed hinge? I need one for an inset hinge, 35mm style. p.s. I answered in a hurry and now I wonder if I misunderstood! Were you asking if the hinge position is 48mm down from the door or the cabinet? Well, I measured from the cabinet, so it might be one or two mm’s less for the door if it’s a little smaller… Took a look at the hinges today and it does look like they go into the door a shade under 12mm or almost half an inch. Another important point to be aware of when hanging cupboard doors using concealed hinges is; how many hinges should you use? The answer to this is that it depends on the size and weight of the door itself.

DCT Concealed Cabinet Door Hinge 35mm Template Jig Kit

First, chances are good you’ll be drilling hinges, installing drawers and drilling cabinet knobs or handles. In the search box put in part number 400-2021. Work Safe, Count to 10 when your done for the day !!

Hinge position from top and bottom of cabinet

There are a number of cabinet hinge jigs available that mimic the high-quality Kreg model described above. The BI-DTool has a few features that set it apart from many low-cost rivals. It is made from engineered plastic—a synthetic resin noted for increased durability. Cams provide the usual offsets at 3mm, 4mm, 5mm, and 6mm, and there’s a depth stop so the jig can be used for framed and frameless doors. Mounting plate: The mounting plate is fixed to the cabinet framework or carcass. The hinge then slides on or clips on the mounting plate holding the door in place You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all: Then we measured the gap between the door and and cabinet with some calipers. It was about 14mm. After adjusting the measurements you provided by that much, we set up my uncle’s Kreg jig accordingly and were successful. Using a tape measure, measure and mark with a pencil around 85mm – 100mm down from the top of door on the hinge edge and the same up form the bottom.

Templates | Blum Templates | Blum

I’m going to test a board, but I think the female portion of the hinge needs to go in deeper than the 20mm for corner cabinets. This guide takes a close look at both types of door hinge jigs: those for full-size doors and those for cabinet doors. The two are actually quite different, so we’ll explain their technical aspects before offering suggestions for what we believe are the best door hinge jigs currently available. To ensure you get the correct hinge it’s often easier to remove an existing one so that you have something to compare your would-be replacements to. This way you will then get an exact match.Hi Marco, there are no templates as the holes are drilled by machine in the factory obviously. I’d just fit the cabinet part of the hinge into the cabinet and then hold the door up against the cabinet and mark the center of the hinge onto the door. Then you should be able to use the measurements in the post above to get the exact place for the hole. You can be a fraction out and still be okay as there is of course some adjustment in the hinge itself.