V23074-A1001-A402 12V 4PIN PA66-GF25

Product Information

The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66. Polym Test. 2016;50:15–25. 10.1016/j.polymertesting.2015.12.008 Search in Google Scholar Flame retardant and dielectric properties of glass fibre reinforced nylon-66 filled with red phosphorous. Polym Degrad Stab. 2001;74(2):239–45. 10.1016/S0141-3910(01)00109-4 Search in Google Scholar The tensile fractured surfaces of the samples treated by the three routes were coated with gold to prevent electrical charging. The surface morphological images of all samples were observed by using scanning electron microscopy (SEM; Sigma 300, Germany) at an acceleration voltage of 5.0 kV. 4 Results and discussion 4.1 Dimensional accuracies of the plate treated by the three routes a) Tensile strength, (b) bending strength, and (c) impact strength of the plate treated by the three routes. 4.3 XRD results obtained for the dried plate treated by the three routes

TNT Express N.V., Thomas Nationwide Transport, is an international courier delivery services company with headquarters in Hoofddorp, Netherlands. The firm has fully owned operations in 63 countries and delivers documents, parcels and pieces of freight to over 200 countries.From the comparison and analysis of the three routes, it can be concluded that the re-dried plate treated by route II is preferred for ensuring the dimensional accuracies, mechanical properties, and the employment character of the medium voltage environment. 5 Conclusion The transverse and longitudinal peripheral dimensions of the plate treated by the three routes: (a) I, (b) II, and (c) III. Structure–property relationships in glass reinforced polyamide, part 2: The effects of average fibers diameter and diameter distribution. Polym Compos. 2007;28(3):331–43. 10.1002/pc.20260 Search in Google Scholar Annealing effect on crystalline structure and mechanical properties in long glass fibers reinforced polyamide 66. J Appl Polym Sci. 2017;134(13):1–10. 10.1002/app.44832 Search in Google Scholar The shape of the central circular hole of the plate: (a) without the “supporting mold” and (b) with the “supporting mold.”

This work was financially supported by the National Natural Science Foundation of China (51705295 and 51778351), The Shandong Provincial Natural Science Foundation, China (ZR2020KE013 and ZR2018MEE022), and University QingChuang science and technology plan of Shandong (2019KJB015). Annealing effect on semi-crystalline materials in creep behavior. J Therm Anal Calorim. 2002;69(1):37–52. 10.1023/A:1019925420733 Search in Google Scholar

Our offer

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated. cycles, in every cycle: −40 to 130°C, 10°C/h, the highest and lowest temperatures were maintained for 4 h, room temperature was maintained for 2 h. Dimension and tolerance requirements of the plate (unit: mm). 2.2 Mold structure and its gate location

Data availability statement: The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. display the information in a consistent format. Users requiring more precise data for scientific or engineering

TechPlasty

The XRD patterns of the plate. 4.4 Microstructure analysis and of the dried plate treated by the three routes where S L is the shrinkage ratio of the injection molded products, L m is the mold cavity size (the real size after considering the shrinkage volume compensation of 0.5%), and L p is the size of the injection molded products. Influence of water on the short and long term mechanical behaviour of polyamide 6(polyamide) fibres and yarns. Multiscale Multidiscip Modeling, Exp Des. 2018;1(4):317–27. 10.1007/s41939-018-0036-6 Search in Google Scholar Structure-property relationships in glass-reinforced polyamide, part 3: effects of hydrolysis ageing on the dimensional stability and performance of short glass-fibers-reinforced polyamide 66. Polym Compos. 2007;28(3):344–54. 10.1002/pc.20312 Search in Google Scholar