Hikvision 4 channel NVR with POE (DS-7604-NI-SE-P)

Product Information

If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

4 channel NVRs : CCTV Kits 4 channel NVRs : CCTV Kits

Once configured in NVR with the data of our network we will be able to see the cameras in high definition from any device with access to the network. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable. HDMI output at up to 3840 x 2160 resolution - VGAoutput at up to 1920×1080resolution - Simultaneous output The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience.

Product spotlight

Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data. Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive. We must first connect the Monitor/Screen/TV to the NVR via HDMI or VGA cable so that we can see the image and start configuring the NVR initially.

Hikvision NVR Range 4 channel - CCTV Empire

The WIFI cameras must be placed in places where they receive the WIFI signal from the router and we can connect them to the current so that they receive power. Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.HDMI 2 Output 1-ch, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz We must place the WIFI cameras in places where they receive the WIFI signal from the Router and near a power outlet, we connect the POE cameras to the POE Switch so that they receive power and have access to the Router. https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions HDMI Output 1-ch, 4K (4096 x 2160)/30 Hz, 4K (3840 x 2160)/30 Hz, 2K (2560 x 1440)/60 Hz, 1920 x 1080/60 Hz, 1600 x 1200/60 Hz, 1280 x 1024/60 Hz, 1280 x 720/60 Hz;1-ch, 4K（4096x2160）/30Hz，4K (3840×2160) /30Hz, 2K（2560×1440）/60Hz，1920×1080/60Hz，1600×1200/60Hz，1280×1024/60Hz，1280×720/60Hz; ,HDMI/VGA simultaneous output,;1-ch, 4K (3840 × 2160)/30Hz, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz; ,HDMI/VGA simultaneous output,;1-ch, 4K（4096x2160）/30Hz，4K (3840×2160) /30Hz, 2K（2560×1440）/60Hz，1920×1080/60Hz，1600×1200/60Hz，1280×1024/60Hz，1280×720/60Hz ,HDMI/VGA simultaneous output,

Hikvision DS-7604NXI-K1/4P 4ch 4PoE up to 8MP - AcuSense

HDMI Output 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz You can use the Hikvision NVR system to determine the maximum supported input and output resolution, as well as how many channels should be recorded on the Hikvision NVR POE system. Network Protocol TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network Protocol TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF, SNMPThe recording of Hikvision IP cameras is usually done with hikvision nvr 8 channel or hybrid DVR, as these are more suitable than conventional PCs. The advantages of the Hikvision NVRs are that they are of course fully compatible and support all the functions of the Hikvision cameras. When using third-party devices, it may happen that one or the other function does not work because the protocols are not always fully compatible. The NVRs are available in different versions which differ in the number of channels, hard drive connections, or integrated PoE switches.