CURT 45821 Clevis Pin Hitch Ball Mount, Fits 2-Inch Receiver, 6,000 lbs, 1-Inch Hole, GLOSS BLACK POWDER COAT

Product Information

One point to note is that a 50mm ball (rated to 3500kg) with a slightly longer shaft should be used to ensure the coupling seats properly. That hasn't been used much because there is very little wear in the pegs and holes on the back of the top frame, where the latches pivot or in the drawbar clevis. A Checklock cap is also included to ensure positive attachment as well as aiding in keeping dust and water out of the hitch’s workings. A 50mm ball offers acceptable horizontal movement, but is particularly restrictive in rotational and vertical angle movement, making for steep descents or ascents into gullies or river banks impossible without damage. For instance, the clevis fastener is frequently used to secure loads to machinery, trailers, pickup trucks, and more.

Hitch Towing Ball Mounts, 2-Inch Ball TOPTOW ATV/UTV Trailer Hitch Towing Ball Mounts, 2-Inch Ball

A simple depression of the top cap and the positive latching indicator (after which you can remove your hands) allows the raising of the jockey wheel to unhitch the hitch from the pin. From memory one part was fixed and the other detachable, the detachable piece was always a little loose. Equally distant to anything else on the market as McHitch’s Uniglide drop-on system, the Auto Coupler almost dismays for its uniqueness. These are designed to fit in between our Clevis Joints to create a linkage where an angular offset is required. The Hitch-Ezy is one of a few hitches that don’t incorporate a vehicle-mounted receiver that transfers the ball weight of the trailer rearward of the standard towing point.Unless you get the holes perfectly aligned, you can’t slide the locking pin in… regardless of how much yelling you do! Given the design has been tested and passed, plus is ADR approved, I’d suggest the McHitch system should be safe and suitable in its use. It’s got easily replaceable bushes to ensure a quiet ride and is as simple as they get while being very clever in its dedicated off-road recreational design parameters. tonnes ATM “must have a quick-release coupling which is designed to be engaged and disengaged without the use of tools.

CURT 45821 Clevis Pin Hitch Ball Mount, Fits 2-Inch Receiver

This hitch can be removed from your tow vehicle, even under load from the trailer, making for easy operation. Greasable bushings ensure squeak-free workings, while the corrosion-resistant coating should keep your hitch looking like new.There are many different designs of number 33 and parts seen above it of course, to suit different brands and models of tractor. The better the self-aligning ability of the coupling, the easier your life will be every time you use your trailer or van. Other pluses are that the hitch is quite low profile (allowing for use with most tow vehicles’ rear doors), it doesn’t require pins or other locking mechanisms to be used and it can be used with weight-distribution systems.