TCP Smart 13A Wi-Fi Plug

Product Information

It’s built for HomeKit and the future, with support for Thread, the new low-power wireless mesh networking protocol. And, as of a recent firmware update, it’s now Matter compatible, so will work with other Matter compatible systems (we’ve tested it with SmartThings). You will notice that the output from the service is not just a single value (it contains “;ok” as well). The TCP Smart WiFi Plug does lack some functionality that features in other smart plugs, such as the Away mode inn the TP-Link Kasa KP105, which will randomly turn the plug on and off, so you can hook it up to a lamp and mimic occupancy when you’re not at home.

HomeKit support also means you get Siri control, so you can turn the plug on and off with your voice. Check your Wi-Fi settings on the router to see the number of connected devices and disconnect some to make room for the Smart Plug. So let’s look at some reasons your TCP Smart Plug won’t connect to Wi-Fi and how to fix the problem. TCP confirms that each LED bulb is more economical as it uses 80 percent less power than a traditional incandescent bulb.Smart plugs are available as either single plugs or as strips, with multiple individually-controlled sockets. LED drivers in the bulbs are constantly turning the unit on and off at a rate faster than your eyes can detect when in use, so when using the Scene mode in the TCP Smart App where the bulbs flash, it will make no difference to how long they last compared to if they were just on. If you get a smart plug that uses a smart home protocol, such as Zigbee, you’ll need to have a compatible system, such as Philips Hue.

Installation through the Hue app is a little fiddly and, if you just want to control this plug via a device, you’ll need to put it in its own room or Zone. Dave has over 20 years' experience in the tech journalism industry, covering hardware and software across mobile, computing, smart home, home entertainment, wearables, gaming and the web – you can find his writing online, in print, and even in the occasional scientific paper, across major tech titles like T3, TechRadar, Gizmodo and Wired.The latter geolocation tool only works with a single device, so isn’t much cop for multi-user households. The TCP integration allows the integration of some services for which a specific Home Assistant integration does not exist. Firing it up for the first time brought a sense of déjà vu, since it’s very much based on the Smart Life app; however, it’s been skinned to only allow you to add TCP products. And if you’re also looking to set up your TCP Smart Plug with its app (TCP Smart) but not sure how to do that, keep reading.

More so, make sure your smartphone is connected to the same Wi-Fi network you want to connect your Smart Plug to. A smart plug is a versatile and simple way to operate an electrical device or appliance remotely, acting as the medium between this and the power outlet to provide the connection to a smartphone, tablet or compatible voice assistant. Controlled via the TP-Link Kasa app, each socket can have its own name and icon, giving you full individual control, including schedules and power toggling. With Wi-Fi, you just connect the plug to your home network, so all you need is a strong enough signal where you want to plug in.

If your TCP plug isn’t blinking blue rapidly, press and hold the Power button for about 5 seconds or so. I am aware that some devices have problems connecting to the hub when smart wifi is turn on, so lets get it turned off.