Tough Easy to Install, Plastic Freewheel Spoke Protector, Disc Bike Spoke Guard, 4 Claws Design for Protecting the Chain Reducing the Sediment on the Flywheel

Product Information

Prevents your chainset, wheel and frame from being scratched or scraped by the cassette when it shifts on rough terrain. If this happens, you could end up having to get a whole new wheel. This could save you a lot of time and money when it comes to having to replace your wheel if this does happen. When you are riding on a low gear, a sudden jump or a touchdown could lead to a chain drop. Technically, the chain bounces when the bike jumps and when it comes down. When the bicycle is put in its highest or lowest gear, slipping can trigger the following scenarios:

Keeping your bike maintained is a big key to this. Making sure the bike chain is lubed and tight, making sure all of the bolts are secure, and all of the parts are replaced if worn, all contribute to having less risk of an accident.If you have the correct tools to remove your cassette, then it’s recommended to do so! This is because some Dork Disks can be challanging to cut off, which can end up taking more time than simply taking the cassette off – plus you don’t risk damaging your spokes(or hands). Where to Buy a Dork Disk/spoke protectors? Most new bikes come with spoke protectors (dork disk). Your local bike shop should have spoke protectors for sale, or you can look online. Final Thoughts (Should I Remove My Dork disk?) One downside is the deterioration with age. Most of the spoke protectors from the late 80s onwards start as or frosted clear stiff plastic with a lot of flex. If you put even minimal value on your bike and want to prevent expensive repairs, then I recommend that you keep the spoke protector on. Can You Remove Dork Disc From Bike The spoke protector has to be larger than the entire cassette. As a result, its body tends to accumulate a lot of hard-to-clean mud “contaminating” the rear cogs. This is a problem primarily for mountain bikers and touring cyclists riding in hardcore conditions including mud and snow. 4. Drivetrain Jam

Consequently, due to the coasting hub, the chain may greatly damage the spokes. That’s where a spoke protector becomes every rider’s darling. Going by what we discussed earlier in the post, it is evident the spoke guard plays a vital role in your bike. Therefore, the answer here is, yes, you need a spoke protector on your bike. A chainwhip, a cassette remover & a wrench is needed to remove the bolt that holds the cassette in place and then you can easily take off protector.Therefore, it’s wise to inspect the spoke protector occasionally to see if it’s strongly connected to the spokes. When brake pads are dirtied, they lose their efficiency, and they also make a lot of squeaky noises. These noises are irritating, and brakes with compromised efficiency can be catastrophic. Do You Need a Spoke Protector – Which is the Best One? Another positive side of spoke guards is that they isolate the rear cogs and reduce the chances of contaminating the brake rotor and subsequently the brake pads with oil and dirt coming off the cassette and chain.

If the plastic disc is brittle, the easiest way to remove is by using a screwdriver and break the disc into pieces. If the disc is still firm and not easily breakable by your hand or screwdriver, you will need 3 tools to help you remove it. A spoke protector is also called a dork disc because if the rear derailleur is adjusted correctly, the disc is unnecessary.The dork disc can be removed from your bike and is pretty simple. First, feel the disc with your hands to see if it is still firm or if it is worn.